Its Time to learn
 
Notifications
Clear all

Its Time to learn

12 Posts
6 Users
0 Reactions
5,670 Views
Posts: 23
Topic starter
(@twukken)
Eminent Member
Joined: 9 years ago
[#47782]

Very Newbie here. Yes I am to late for Christmas this year but that doesn't mean I cant experiment 🙂

My goal is to next year have a brilliant dislpay, not over the top but have some perimeter ws2812B's along the house trim and 1 mega tree with a few other things

I was planning on using a Teensy with a SD card that will house the full show so all I need to do is power it up every night and it will run itself.
I am not sure how this is done yet but i have a year to figure it out.

By trade I am a engineer so building stuff is in my box of tools however programming is all new to me but i am a quick learner

Anyone with helpful tips on how I can get started is very welcome.
I have messed around with vixen a very little and find it quite confusing at first.
I have ordered 9 strands of ws2812b and a teensy 3.6 with a optows2811 board to do some testing with

Anyway if anyone has done this that can point me in the right direction it would be greatly appreciated

Thanks in advance

Jason


11 Replies
Posts: 3
(@stress-relief)
New Member
Joined: 9 years ago

I to am new and also trying the set teensy with vixen. Very new and trying to read everything I can. thanks Stress


Reply
Posts: 1592
(@ruppro)
Noble Member
Joined: 11 years ago

Don't know about a teensy, you would probably have to do the complete programing yourself for that, but a Rasberry Pi, you can load the "Falcon Pi Player" (FPP) and load your sequences and songs and it will run your whole show. currently used by 100s of fellow light enthusiast


Reply
MartinMueller2003
Posts: 7613
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

plus 5 on the pi. pi plus fpp free software plus pi hat from falcon is a complete show in a box.


Reply
Posts: 23
Topic starter
(@twukken)
Eminent Member
Joined: 9 years ago
Ruppro wrote:Don't know about a teensy, you would probably have to do the complete programing yourself for that, but a Rasberry Pi, you can load the "Falcon Pi Player" (FPP) and load your sequences and songs and it will run your whole show. currently used by 100s of fellow light enthusiast

It’s a good idea but I think it will need an additional controller trying to save the controller $$


Reply
Page 1 / 3
Share: