ESPixelStick - E1.3...
 
Notifications
Clear all

ESPixelStick - E1.31 WiFi Pixel Controller

948 Posts
178 Users
0 Reactions
503.7 K Views
Posts: 631
(@stampedeboss)
Honorable Member
Joined: 13 years ago

Now I'm really confused. I have the upper section and lower sections, but not the pixel configuration section.


Reply
Posts: 2048
(@scootchu)
Noble Member
Joined: 17 years ago

Did you mistakenly flash it with the serial firmware

Sent from my SM-G930V using Tapatalk


Reply
sporadic
Posts: 1199
Topic starter
(@sporadic)
Noble Member
Joined: 14 years ago

For those that may only follow this thread, 3.0 firmware is released - http://doityourselfchristmas.com/forums/showthread.php?49026-ESPixelStick-v3-0-Released

stampedeboss wrote:Now I'm really confused. I have the upper section and lower sections, but not the pixel configuration section.

Are you using the binaries or compiling from source?


Reply
Posts: 631
(@stampedeboss)
Honorable Member
Joined: 13 years ago

not serial, I just checked and verified.Using Binaries.


Reply
Posts: 631
(@stampedeboss)
Honorable Member
Joined: 13 years ago

upgraded to the new release, problem resolved.


Reply
Posts: 304
(@dennis-cherry)
Reputable Member
Joined: 19 years ago

I need to convert two EpsPixelSticks to DMX output.

For some reason I cannot find the instruction to add the TTL to RS485. Will be using the V3 firmware.

Can someone help me with the link?

Dennis in Tennessee


Reply
ukewarrior
Posts: 4674
(@ukewarrior)
Illustrious Member
Joined: 18 years ago

Here you go...
https://diychristmas.org/vb1/showthread.php?7274-ESPixelStick-RS485-DMX-Hack

Dennis Cherry wrote:I need to convert two EpsPixelSticks to DMX output.

For some reason I cannot find the instruction to add the TTL to RS485. Will be using the V3 firmware.

Can someone help me with the link?

Dennis in Tennessee


Reply
Posts: 2507
(@mrgrumpy)
Famed Member
Joined: 12 years ago

Gotta comment: It is just absolutely amazing how well (2) ESPixelSticks run a 1000 pixel Mega Tree, and a 70 pixel star. Virtually seamlessly, in a 15 universe, all wireless setup.
Great Job Shelby, the V2 and Release 3.0 are just fantastic.

Also need to thank Bill Porter for his work with the ESP, which introduced me to the ESP world.


Reply
Posts: 304
(@dennis-cherry)
Reputable Member
Joined: 19 years ago

Thanks

Dennis


Reply
Posts: 375
(@gocats7)
Honorable Member
Joined: 18 years ago

Those of you mounting a PS with the pixelstick, what enclosures are you doing? I have considered the cg500 or a section of 3" PVC would hold both. Looking for ideas to house both and figure this has already been worked out by those using these for a while.

Sent from my Pixel 2 XL using Tapatalk


Reply
Page 83 / 95
Share: