ESPixelStick - E1.3...
 
Notifications
Clear all

ESPixelStick - E1.31 WiFi Pixel Controller

948 Posts
178 Users
0 Reactions
503.7 K Views
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago
artem wrote:My first soldering . First experience homemade DIY

Two libraries to choose:
ArtNet - D4 (GPIO2)
E1.31 - D2 (GPIO4) by http://forkineye.com

Curious how well that design works for you. That's a lot of wifi radios with their antennas less than a wavelength apart.


Reply
Posts: 94
(@davros)
Estimable Member
Joined: 13 years ago

Backer material- Don't know the Russian name, hope it is simpler than ours - Oriented Strand Board -OSB.
My local carpenters called it aspentite, probably an old brand name for it.


Reply
Posts: 11
(@artem)
Active Member
Joined: 9 years ago
davros wrote:Backer material- Don't know the Russian name, hope it is simpler than ours - Oriented Strand Board -OSB.
My local carpenters called it aspentite, probably an old brand name for it.

Yes, Oriented Strand Board -OSB


Reply
Posts: 17
(@vtpolak)
Active Member
Joined: 11 years ago

Recently crossed the lines on a t connector while doing some power injection . I blew the fuse on the power distribution board but not on the espixelstick , now the espixelstick won’t start up. I swapped out the esp module to a different board and it still works, but I can’t get it power. Any ideas on where to start to fix the espixelstick?

Sent from my iPhone using Tapatalk


Reply
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

I just did the same thing to one of mine last night. Looks like at least the voltage regulator is fried. Easiest and quickest answer is replace it.


Reply
Posts: 64
(@oceanwanderlust)
Trusted Member
Joined: 13 years ago

In the newest firmware, what takes precedence, Universe Boundary, or Pixel Count?

In last years firmware I just set Pixel Count… What should Universe Boundary be? (it keeps snapping to 512) Am I supposed to do the math?

joe

BTW, THANKYOU for this amazing device!!!!


Reply
sporadic
Posts: 1199
Topic starter
(@sporadic)
Noble Member
Joined: 14 years ago
oceanwanderlust wrote:In the newest firmware, what takes precedence, Universe Boundary, or Pixel Count?

In last years firmware I just set Pixel Count… What should Universe Boundary be? (it keeps snapping to 512) Am I supposed to do the math?

joe

BTW, THANKYOU for this amazing device!!!!

In the previous firmware, it was set to 512 internally. It's the point at which it'll start listening for data on the next universe. Thanks!

Sent from my R1 HD using Tapatalk


Reply
Posts: 375
(@gocats7)
Honorable Member
Joined: 18 years ago

Just ordered these power supplies, has anyone used them?

GEREE AC to DC Converter 85 ~ 265v AC to DC 12V 8A Adapter/Industrial Module Switching Power Supply
https://www.amazon.com/gp/product/B00RDTOSFE/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

Does anyone have similar recommendations of a PS to include in the same tube mount with the controller? This is a pretty large thread and search returns a LOT of results for about anything I put in.


Reply
Posts: 631
(@stampedeboss)
Honorable Member
Joined: 13 years ago

I just upgraded to the RC3 firmware, now I can't find where to change the color order. Where is it on the web interface.


Reply
Posts: 2507
(@mrgrumpy)
Famed Member
Joined: 12 years ago
CespRGB

stampedeboss wrote:I just upgraded to the RC3 firmware, now I can't find where to change the color order. Where is it on the web interface.

Reply
Page 82 / 95
Share: