blantrip wrote:As far as I know, these are only available during a group buy. Just keep an eye out for the group buy, probably next year.These things are great, I put one in each of my arches so all I need to do is provide 12V to the arch and away they go.
Thanks, yes I will be on the look out -
what wireless access point do you use for your E1.31 data
bshaver wrote:Thanks, yes I will be on the look out -what wireless access point do you use for your E1.31 data
The most popular one seems to be the ubiquiti nanostation loco M2. It's outdoor rated and directional. I picked mine up for $50 on Amazon. It works very well with the right settings. I assume other ubiquiti APs in the AIrMax series will also work since they use the same firmware. But these models are pretty application specific so if you deviate from the NSLM2 version make sure it's in the 2.4g band and has the right antenna coverage for your application.
I can also say that the ubiquiti UniFi series access points do NOT work well for this. E1.31 over wifi works much better via multicast and the UAP-AC-PRO (and I assume it's siblings) does not do multicast well.
Sent from my iPhone using Tapatalk Pro
Akentut wrote:LOL those are my wifi arches. The power converter was from Alibaba, it's a YS-12s-b 110AC to 5vdc. I think it was 2amp. And i tested them approx 125' from my wireless router that was in my garage. Works just fine.
I'd love to chat to you about your converter you used. and the specs on your arches. I don't want to flood this thread with anything thats off topic but I recently ordered 2 ESP's and plan to power a total of 4 arches.. or so I hope. I'd like to hear more about yours.
Thanks
I have the TP Link: TL-WA7210 and it seems to work well.
Also concerning the 110v to 5Vdc. Keep an eye on the amp rating. The 2 amps only gets you at most 50 pixels. I have a set of 50 pixels in a 5 x 10 matrix on the trunks of my 3 big trees. I have one ESPixel stick for each one with a ac/dc converter in each one. I literally just plug into any 110 outlet and I'm off to the races. My arches have 75 pixels and I think these little converters would be overpowered, so I opted for a single 30Amp PS to run all my arches. It allows me to use T splitters and power inject after every 2. Since the pixels in my arches are grouped by 3, each arch is only 25 channels so I can get away with one ESPIXELstick for 6 arches with 2 power injection points, plus power on the first arch.
ThinkAgainAgain wrote:This is great info - I was just trying to wrap my head around it. Thank you!
Hello there,
Where to download this update.

