ESPixelStick - E1.3...
 
Notifications
Clear all

ESPixelStick - E1.31 WiFi Pixel Controller

948 Posts
178 Users
0 Reactions
503.7 K Views
Posts: 1387
 kev
(@kev)
Noble Member
Joined: 12 years ago

Finally assembled and tested all 10 of my ESPixelsticks. I have one that causes flickering of the pixel string. I have change the board to different strings and changed the ESP-01. The problem follows the board. Any ideas on what might be causing the flickering?


Reply
sporadic
Posts: 1199
Topic starter
(@sporadic)
Noble Member
Joined: 14 years ago
kev wrote:Finally assembled and tested all 10 of my ESPixelsticks. I have one that causes flickering of the pixel string. I have change the board to different strings and changed the ESP-01. The problem follows the board. Any ideas on what might be causing the flickering?

First I've heard of that one, sounds like something may be dodgy with the output buffer (U3). Can post a high res picture of the board where I can see the solder connections on U3?
thanks,
-shelby


Reply
Posts: 98
(@davedecali)
Estimable Member
Joined: 10 years ago

Folllowing ... have the same flickering but have 4 more boards to put together... will check the solder points on U3

Sent from my iPhone using Tapatalk


Reply
sporadic
Posts: 1199
Topic starter
(@sporadic)
Noble Member
Joined: 14 years ago
davedecali wrote:Folllowing ... have the same flickering but have 4 more boards to put together... will check the solder points on U3

Sent from my iPhone using Tapatalk

How many pixels connected, what version of firmware, and is your E1.31 source hardwired?
thanks,
-shelby


Reply
Posts: 98
(@davedecali)
Estimable Member
Joined: 10 years ago

10 pixels, latest firmware from the flash updater, e1.31 coming from pi3 FPP... and also test mode direct on webpage... both had flicker

Sent from my iPhone using Tapatalk


Reply
Posts: 98
(@davedecali)
Estimable Member
Joined: 10 years ago

Also not your board, it's the Renard Espixel... your board comes to me Wednesday via Amazon so hoping to troubleshoot with it

Sent from my iPhone using Tapatalk


Reply
Posts: 1387
 kev
(@kev)
Noble Member
Joined: 12 years ago

Not a very good picture of U3, but it looks like good solder joints to me. I have 50 pixels configured.

IMG 3332
IMG 3327

Reply
Posts: 1387
 kev
(@kev)
Noble Member
Joined: 12 years ago

deleted


Reply
Posts: 1387
 kev
(@kev)
Noble Member
Joined: 12 years ago

New pixels. Pixels work on other ESPixelsticks. Firmware 2.0. Pi-3 with FPP hardwired to router. Other 9 ESPixelsticks worked OK.


Reply
Posts: 98
(@davedecali)
Estimable Member
Joined: 10 years ago

Took the Renard pixel stick off the main home wifi network and placed onto "guest" network the Apple router had to limit cross traffic... checked voltage off board at 12V and viola no more flicker sending E131 from FPP

Sent from my iPhone using Tapatalk


Reply
Page 61 / 95
Share: