ESPixelStick - E1.3...
 
Notifications
Clear all

ESPixelStick - E1.31 WiFi Pixel Controller

948 Posts
178 Users
0 Reactions
503.8 K Views
Posts: 61
(@lazerblue)
Trusted Member
Joined: 10 years ago
sporadic wrote:Started playing around with Home Assistant and got MQTT setup between it and the ESPixelStick code. Still need to do some performance and stability testing, but a basic implementation will be available soon.


Connecting to slacker as testinghostname
Connecting with DHCP.........
Connected with IP: 192.168.1.124
- Unicast port: 5568
- Web Server started on port 80
- Listening for 512 channels, from Universe 1 to 1
- Attempting MQTT connection... *connected*
Topic: esps/light/switch | Payload: ON
Topic: esps/rgb/set | Payload: 120,255,95
Topic: esps/light/switch | Payload: ON
Topic: esps/rgb/set | Payload: 30,0,144
Topic: esps/light/switch | Payload: ON
Topic: esps/brightness/set | Payload: 30
Topic: esps/light/switch | Payload: ON
Topic: esps/light/switch | Payload: OFF

Looking forward to seeing more of this. Been trying to figure out a way to do this for my floods and garden spots during the off season.

Sent from my SM-G935T using Tapatalk


Reply
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago
MattPenner wrote:If it's CLAP related let me know. That would be fun. Tho I've got a million other pet projects that I've always been meaning to start. Now that the kids are old enough free time has been spent with sports, martial arts, gymnastics, ha! Might get hobby time after they hit high school. 😉

Sent from my iPhone using Tapatalk

Vixen is always looking for more developers. It's all C#. It's a huge and complex project overall. But there's lots of small pieces that aren't too hard to bite off.

Sent from my iPhone using Tapatalk Pro


Reply
sporadic
Posts: 1199
Topic starter
(@sporadic)
Noble Member
Joined: 14 years ago
Kev7274 wrote:Tried out the new firmware Shelby and it's nice. Having the ability to use something else besides static during testing is great. :thup2:
I didn't see the "stop" option during testing though,was it not in this version? I just move to black to turn off the lights now.

Selecting "Disable" should black them out and turn testing off, unable to verify at this time though.


Reply
sporadic
Posts: 1199
Topic starter
(@sporadic)
Noble Member
Joined: 14 years ago

Initial MQTT support is rolled in. At this time, its just static with all pixels set to the same color. Also, I haven't implemented "brightness" yet. I would love to get some feedback from you all that do home automation on how this works out for you. Here's a quick rundown of it works (in the README as well).

MQTT can be configured via the web interface. When enabled, a payload of "ON" will tell the ESPixelStick to override any incoming E1.31 data with MQTT data. When a payload of "OFF" is received, E1.31 processing will resume. All Topics are under the configured top level Topic.

For example, if you enter porch/esps as the topic, the following topics will be generated:


porch/esps/light/status
porch/esps/light/switch
porch/esps/brightness/status
porch/esps/brightness/set
porch/esps/rgb/status
porch/esps/rgb/set

And here's a corresponding configuration for Home Assistant:


light:
  - platform: mqtt
    name: "Front Porch ESPixelStick"
    state_topic: "porch/esps/light/status"
    command_topic: "porch/esps/light/switch"
    brightness_state_topic: "porch/esps/brightness/status"
    brightness_command_topic: "porch/esps/brightness/set"
    rgb_state_topic: "porch/esps/rgb/status"
    rgb_command_topic: "porch/esps/rgb/set"
    brightness_scale: 100
    optimistic: false

Reply
kwoodard
Posts: 281
(@kwoodard)
Reputable Member
Joined: 13 years ago

I've loaded the new firmware on a few of my ESPixelSticks and have them configured with a static IP address on my home network. I would like to now change the network to which it is connected (switch from my home network to my temporary show network), but the "Save Changes" button on the Wireless Setup is not active. Do I have to reflash to change the network settings or am I doing something wrong?


Reply
Posts: 2048
(@scootchu)
Noble Member
Joined: 17 years ago

Try microsoft edge browser. I was having weird issues using my chrome browser on my phone.

Sent from my SM-G930V using Tapatalk


Reply
kwoodard
Posts: 281
(@kwoodard)
Reputable Member
Joined: 13 years ago
scootchu wrote:Try microsoft edge browser. I was having weird issues using my chrome browser on my phone.

Sent from my SM-G930V using Tapatalk

Same behavior in the Edge browser. When I mouse over the "Save Changes" button, I get a red circle with the line through it.


Reply
sporadic
Posts: 1199
Topic starter
(@sporadic)
Noble Member
Joined: 14 years ago
kwoodard wrote:I've loaded the new firmware on a few of my ESPixelSticks and have them configured with a static IP address on my home network. I would like to now change the network to which it is connected (switch from my home network to my temporary show network), but the "Save Changes" button on the Wireless Setup is not active. Do I have to reflash to change the network settings or am I doing something wrong?

It's a validation bug in the dev release. Change something in the hostname field and the save button should activate.

Sent from my R1 HD using Tapatalk


Reply
Posts: 2048
(@scootchu)
Noble Member
Joined: 17 years ago

I've only done one module with the new version.

Sent from my SM-G930V using Tapatalk


Reply
kwoodard
Posts: 281
(@kwoodard)
Reputable Member
Joined: 13 years ago
sporadic wrote:It's a validation bug in the dev release. Change something in the hostname field and the save button should activate.

Sent from my R1 HD using Tapatalk

Thanks! I just stumbled across that and was about to post it. Trying to get some last minute testing in tonight before heading to the Expo in the morning. Thanks for your help!


Reply
Page 60 / 95
Share: