ESPixelStick - E1.3...
 
Notifications
Clear all

ESPixelStick - E1.31 WiFi Pixel Controller

948 Posts
178 Users
0 Reactions
503.8 K Views
Barnabybear
Posts: 1583
(@barnabybear)
Noble Member
Joined: 15 years ago
MartinMueller2003 wrote:AT Request for sd card. The ESP-01 has limited IO pins. We might have to move to one of the devices with more IO (they come with more rom memory and drive the price up 3-4 dollars) to support such a request.

Hi, I think you'll find Bill Porter (Madsci1016) has already done some work on this. He posted some code on his Github a few weeks ago for an ESP to read the header files on .fseq files.


Reply
MartinMueller2003
Posts: 7615
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

The issue is not with getting it done but how much space it needs in the device memory and the pins needed to drive the SD card. using two pins to drive the sd card means those two pins are not available to drive LEDs. so one of a couple options needs to be decided.

Have more light strings and no sd
Have one light string and an sd card
Use a device with more IO and have two string outputs and an SD card.
Add some buffering (a latch) to drive the lights and have an sd card (could add issues with output timing).

Then there are the memory issues. The ESP-01 has code space. The OTA loader needs the main program to be less than half the space in that memory area, further limiting available code space. The larger device quadruples the available memory space but costs a little more and is more difficult to attach to.

So I am not saying it cant be done, I am saying there may be a bit of thought that needs to be put behind doing it. FYI: This would solve my biggest objection to the ESPStick in my show over WiFi. I actually started to add the SD card since I had the code running in another project but ran into the IO issue. I would love to see a redesign using the ESP-12E or F which has a dedicated SPI interface that can be used to drive the SD card without significant performance impact. SDFat works well and would allow you to load files on a PC and play them on the stick.


Reply
Kev7274
Posts: 2037
(@kev7274)
Famed Member
Joined: 13 years ago

I know it's not possible, but having on board power would have been great.

Sent from my SCH-I535 using Tapatalk


Reply
sporadic
Posts: 1199
Topic starter
(@sporadic)
Noble Member
Joined: 14 years ago

Whatever the next project is, it won't be using the ESP-01. Will be something like the ESP12S or WROOM-02 / S2. A SD card is definitely on the table, as well as offloaded processing. I'm still amazed at what we've been able to squeeze out of the ESP8266, especially after today. And with that, some ESPixelStick stuff!

I just pushed some major changes to the GitHub repo for how E1.31 data is processed. It took all day for me to get this hashed out, but I'm very pleased in the performance of it. Lots of big changes compared to 2.0. Big thanks to Rich, Bill, and others that have been contributing on the code while I've been unavailable the past few months. I'll try working on the flash tool tomorrow and see if I can rundown the baud rate issues people have been experiencing. If you're anxious to build it yourself, you'll need to use ESP8266 Arduino straight from their github. The new ESPAsyncUDP I'm using for E131 doesn't work on the 2.3.0 version available from the Arduino board manager.


Reply
Kev7274
Posts: 2037
(@kev7274)
Famed Member
Joined: 13 years ago

Any idea as to when they would be available?
I'm about to start setting up the current controller, for this coming years show,but if something new is coming pretty soon,think I will wait and see.


Reply
sporadic
Posts: 1199
Topic starter
(@sporadic)
Noble Member
Joined: 14 years ago
Kev7274 wrote:Any idea as to when they would be available?
I'm about to start setting up the current controller, for this coming years show,but if something new is coming pretty soon,think I will wait and see.

Probably wouldn't be this year, just brainstorming.

Sent from my R1 HD using Tapatalk


Reply
Posts: 128
(@emuney18)
Estimable Member
Joined: 11 years ago

sporadic is there going to be another run on this controller or do you have any extra? I don't have plans to use it this year but would like 1 to play with.

Sent from my iPhone using Tapatalk


Reply
sporadic
Posts: 1199
Topic starter
(@sporadic)
Noble Member
Joined: 14 years ago
Emuney18 wrote:sporadic is there going to be another run on this controller or do you have any extra? I don't have plans to use it this year but would like 1 to play with.

Sent from my iPhone using Tapatalk

I have some on hand and will be making them available very soon. Just need to get a few things sorted out on this end first.

Question:
For those of you experiencing issues with the flash tool giving you garbage in the monitor window, how many serial ports is your system reporting?
thanks,
-shelby


Reply
sporadic
Posts: 1199
Topic starter
(@sporadic)
Noble Member
Joined: 14 years ago

I just wrapped up the ESPixelStick Firmware 3.0dev1 release. It includes an updated version of the flash tool that allows hostname configuration and fixes the special character encoding error that some people where experiencing with passphrases. For those of you using the flash tool on your own projects, I've moved the firmware configuration json file out of the jar for easier modification. I'm not sure if the baud rate issue has been fixed or not as I am unable to replicate it myself.

Here's a short list of the changes from 2.0:
- Complete re-write of the web frontend. Requires a WebSockets capable browser.
- Migrated to ESPAsyncUDP for E131 parsing (E131 library updated).
- Increased WS2811 reset time from 50us to 300us to support newer WS2811 chips.
- Added hostname configuration.
- Added GBR and BGR color order for pixel

Doesn't look like a lot, but pretty major changes. Still a few things to tidy up and testing to be done, so pleased to hear any feedback you have. I haven't had a chance to test the GECE or Serial stuff yet, however nothing has changed in there recently. You can snag it here - https://github.com/forkineye/ESPixelStick/releases/tag/v3.0dev1

thanks!
-shelby


Reply
Posts: 93
(@kockie)
Trusted Member
Joined: 11 years ago

Thank you; programming works.

Comments: Hostname isn't copied to the esp (stays default), serial monitor is still glibberish in programmer (in arduino serial monitor everything seems right)
When I change hostname in the webconfig of the pixelstick it is seen in the dhcp server. That's a very nice feature!

Thanks for your efforts!


Reply
Page 57 / 95
Share: