Erratic Pixel Behav...
 
Notifications
Clear all

Erratic Pixel Behavior

16 Posts
5 Users
0 Reactions
5,043 Views
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

Vixen 3? Close vixen down and restart. I think I saw a similar problem over the weekend and restarting corrected it for me. Not really sure what happened but something was getting stuck that wasn't showing on screen.

--Jon Chuchla--

Sent from my iPhone using Tapatalk


Reply
scottmcm
Posts: 621
Topic starter
(@scottmcm)
Prominent Member
Joined: 19 years ago

Thanks Jon. As always. I restarted Vixen and the PX1 and the problem has cleared for now.

Sent from my SAMSUNG-SM-G900A using Tapatalk


Reply
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

If it happens again, try to retrace your steps and let us know the last few things you did that lead up to the problem.
I have a hunch it has something to do with using the live effect preview and then playing the sequence in rapid succession. I think something from the live preview gets orphaned and stuck in memory.

--Jon Chuchla--

Sent from my iPhone using Tapatalk


Reply
scottmcm
Posts: 621
Topic starter
(@scottmcm)
Prominent Member
Joined: 19 years ago

Will do. And I can retrace for this time as well since I had just moved the profile from the dev PC to the Show PC. Steps were...Vixen not running, move profile, start Vixen, adjust COM settings, Test everything using web interface, create quick sequence in ShowPC with no Preview running. Run sequence. Thanks!


Reply
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

So you didn't have the sequence editor open? Well that shoots a hole in my idea then.

--Jon Chuchla--

Sent from my iPhone using Tapatalk


Reply
scottmcm
Posts: 621
Topic starter
(@scottmcm)
Prominent Member
Joined: 19 years ago

I did have it open. I ran the sequence from the editor. Just did not have the preview active.

Sent from my SAMSUNG-SM-G900A using Tapatalk


Reply
Page 2 / 2
Share: