Notifications
Clear all
Pixels and Pixel controllers
4
Posts
3
Users
0
Reactions
1,482
Views
Nov 07, 2015 6:56 pm
I'm currently running gece pixels off of an E682 and the white is pinkish. The stock gece power supplies are 6v and I'm currently driving them with 5v. I want to turn up the power supply to hopefully fix the pinkish white. How high can I turn up the input voltage on the 5v input of an E682 without damaging it?
3 Replies
Nov 08, 2015 12:26 am
I would keep it to no more than 5.6V, maybe 5.7V. There is a 6V zener diode that provides over-voltage protection.
Nov 08, 2015 1:09 am
You can always run the E682 from a separate supply (to plug on top) and then set the pixel supply to whatever you need...
Nov 08, 2015 8:05 am
Thanks guys. I was hoping to not have to use a separate supply for the E682 but that might be my best option.
