Maxing out an e682
 
Notifications
Clear all

Maxing out an e682

5 Posts
3 Users
0 Reactions
1,738 Views
Posts: 1133
Topic starter
(@toozie21)
Noble Member
Joined: 19 years ago
[#38789]

I am trying to think ahead a bit here. I have a 73x20 matrix that I might want to make a bit taller at some point. What is the limiting factor if I want to stick with my one e682, universe size?

I currently have 10 strips in a zig zag pattern (to get my 20 lines) on 10 outputs.

How many more lines could I reasonably add (ignoring power right now)?

Short and badly typed since written from my phone...


4 Replies
Posts: 482
(@jcmarksafb)
Honorable Member
Joined: 15 years ago

The 682 has a max. of 12 universes or 2040 pixels


Reply
Posts: 1133
Topic starter
(@toozie21)
Noble Member
Joined: 19 years ago
jcmarksafb wrote:The 682 has a max. of 12 universes or 2040 pixels

OK, thank you. Sounds like in theory I could have 26 string then, 13 zig zagged lines.

Short and badly typed since written from my phone...


Reply
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago
toozie21 wrote:OK, thank you. Sounds like in theory I could have 26 string then, 13 zig zagged lines.

Short and badly typed since written from my phone...

...but only when configured for Unicast mode - - you only get 7 Universe - or 1190 pixels with Multicast mode.


Reply
Posts: 1133
Topic starter
(@toozie21)
Noble Member
Joined: 19 years ago
budude wrote:...but only when configured for Unicast mode - - you only get 7 Universe - or 1190 pixels with Multicast mode.

Good info for anyone else who stumbles upon this.fortunately I only have this piece, so unicast is fine by me 🙂

Short and badly typed since written from my phone...


Reply
Share: