Notifications
Clear all
Oct 17, 2017 1:19 pm
Only thing I see out of the ordinary is your not hooked up to a std network. Other issues could be loose connection or plug on board. You using how many ports with pixels when this happens. Happens on all ports? Firmware can be upgraded if you desire...
Oct 17, 2017 4:09 pm
Just checked again and only 3 of the strips were on from 3 seperate ports of the same side of the board and went off in about 2 seconds then wait a few seconds then come back on. Guess i can just unplug and plug back up before the show..ughh
Oct 17, 2017 4:29 pm
Tomorrow going to try switching pixels from the other side of the board to the problem side and see what happens.
Oct 17, 2017 4:54 pm
Going to try a hard reset also.
