Notifications
Clear all

E682 issue

19 Posts
6 Users
0 Reactions
4,518 Views
Posts: 12
Topic starter
(@tebrigan)
Active Member
Joined: 9 years ago

Will a hard reset be done from the system command by going 10 then 20 then 30?


Reply
Posts: 12
Topic starter
(@tebrigan)
Active Member
Joined: 9 years ago

Will check voltage today, thanks for that.


Reply
Posts: 12
Topic starter
(@tebrigan)
Active Member
Joined: 9 years ago

Over voltage makes more sense being the controller works fine when data is sent to it. Hope that is it.


Reply
Posts: 12
Topic starter
(@tebrigan)
Active Member
Joined: 9 years ago

Replaced power supply and they have not came back on yet... I had 2 in the box and replaced the 1 to the side that was coming on. Both showed 11vts but maybe it was spiking...not sure but hopefully that fixed it. Thank you to all who came input, I appreciate it.


Reply
Page 4 / 4
Share: