Notifications
Clear all

BAD Pixels

43 Posts
20 Users
0 Reactions
14.4 K Views
Keebler
Posts: 1691
Topic starter
(@keebler)
Noble Member
Joined: 18 years ago
budude wrote:The round type - I do have them secured to wire rope so there is no strain on them.

all of my pixels were secured on BANDING material with zip ties (to avoid any strain), and they were all oriented upright.


Reply
Posts: 327
(@thebaronn)
Reputable Member
Joined: 17 years ago
Zeph wrote:The 2801 and 2811 are very different and it probably doesn't make sense to combine them conceptually as a 28x1 family.

The 2801 has 4 wires, with separate clock and data lines.

Bad pixel with no clock out = no downstream control, probably off.
Bad pixel with clock out but data out stuck low = all downstream off
Bad pixel with clock out but data out stuck high = all downstream white

So all downstream white is an understandable failure mode for the 2801.

The 2811 has 3 wires, with a self timing data/clock line. It's harder to picture it failing with all white downstream, as it would have to generate valid pulses for 1-bits on the single output.

I swear I am not crazy! LOL! Here is a little video of some 2811 failure. I came home to 2 bad pixels in one string. The first one turned everything white. The 2nd one turned everything off.


Reply
Posts: 2168
(@djulien)
Noble Member
Joined: 19 years ago
Zeph wrote:Bad pixel with no clock out = no downstream control, probably off.
Bad pixel with clock out but data out stuck low = all downstream off
Bad pixel with clock out but data out stuck high = all downstream white

So all downstream white is an understandable failure mode for the 2801.

This is a helpful classification of different types of errors that can occur. thanks!

don


Reply
Page 5 / 5
Share: