Notifications
Clear all

BAD Pixels

43 Posts
20 Users
0 Reactions
14.4 K Views
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago
Santacarl wrote:Thanks Brian....That's interesting and encouraging since the round ones are the lower IP rating at 66 while the square ones are rated at 68.

Have you had them long enough to see any UV impact on the wires yet? I've heard that some of the pixels, since most were designed for inside/enclosed environments instead of outside environments like we use them in, don't fare well under repeated sunlight exposure..... I live in the south and get LOTS of sunshine that time of year.....was wanting to do my homework on that aspect of pixels too....but haven't seen a whole lot of data on it as of yet....

Keep in mind that the pixels you buy today from Ray may be completely different from the ones I bought. Ray is really just a reseller himself so his stock changes around. As far as the wiring - probably not - they were out in full sun for a week or so at Halloween (had a matrix built) and then 4-5 weeks for the Christmas show where it was mostly cloudy (but not sure that effects certain UV anyway). With that said, I did notice a slight fading in them but no cracking.


Reply
Posts: 1763
(@santacarl)
Noble Member
Joined: 19 years ago
budude wrote:Keep in mind that the pixels you buy today from Ray may be completely different from the ones I bought. Ray is really just a reseller himself so his stock changes around.

Understand....that sure makes it a crapshoot in a way..... I guess when the only source is off shore....that's what you get... I sure do miss the quality you could expect when you USED TO see "Made in America" on products.... I don't think people in this country had any idea what we got into when we outsourced our manufacturing base.....the chase for 'cheap' has a price.....kinda ironic....... I would blame the politicians but we did it to ourselves.....we LET THEM DO IT.....

I understand that Ray is a good guy to deal with and from all accounts I've read he is truthful and good at making things right when there are problems..... but even he is at the mercy of some of these suppliers that have little to no quality control.

Sorry for the rant.....just a pet peeve of mine....


Reply
Posts: 792
(@boarder3)
Noble Member
Joined: 19 years ago

you are 100% right i dealt with ray 3 times 2 great one terrible. but like you said he must of used a different supplier for my last order.


Reply
Posts: 503
(@iflights)
Honorable Member
Joined: 14 years ago

I had 13 strands of 50 GECE in the display this past season. The 7 pixel failures I had were isolated to only 4 strands...all 7 lost a single color. Blue always worked, which is interesting, the reds and greens were the colors which failed. 9 strands survived with no failures since they were put up on 10/31 and just taken down. 1 single strand had 4 of the 7 bad pixels. I really don't know what I would do differently, or if an alternative would have given better results...or is it something we should just expect.


Reply
Posts: 1076
 Zeph
(@zeph)
Noble Member
Joined: 15 years ago

The 2801 and 2811 are very different and it probably doesn't make sense to combine them conceptually as a 28x1 family.

The 2801 has 4 wires, with separate clock and data lines.

Bad pixel with no clock out = no downstream control, probably off.
Bad pixel with clock out but data out stuck low = all downstream off
Bad pixel with clock out but data out stuck high = all downstream white

So all downstream white is an understandable failure mode for the 2801.

The 2811 has 3 wires, with a self timing data/clock line. It's harder to picture it failing with all white downstream, as it would have to generate valid pulses for 1-bits on the single output.


Reply
Posts: 109
(@max-paul)
Estimable Member
Joined: 14 years ago

I am new so hope what I am about to say is not wrong. I have some of rays 2811 and a E682. I turned off all sockets with the exception of two. Putting on the 2nd string, I by accident put it on the 3rd socket of cluster 1. All LEDs went white. I am saying this to bring up a point. Is it possible if a whole string was to go white, that the controller might be putzed, or at least one outlet of the controller. Sorry hope that did sound ridiculous.


Reply
Keebler
Posts: 1691
Topic starter
(@keebler)
Noble Member
Joined: 18 years ago
LabRat wrote:I think the intent to keep this on a technical level a laudable one.

The suggestion that the failures may be a result of a cascade is a good one. It was mentioned that the "bad" pixels go white. Were they individual pixels, or strings that went wrong @ the same time?

they were scattered across several strings.


Reply
Keebler
Posts: 1691
Topic starter
(@keebler)
Noble Member
Joined: 18 years ago
rjchu wrote:I second this. The thing about this community that makes it so great is that folks provide information, recommendations and experiences- both good and bad. Seems odd to withhold the vendor's name. This is the time of year most of us are making our purchases for our 2013 shows so it'd be a help to everyone in that boat - myself included. Then, if the vendor "makes right" on the situation, posting a follow-up stating that is entirely in order as well.

Thanks,

-joni-

i have not mentioned the vendor, because i have not yet gotten a response from them


Reply
Keebler
Posts: 1691
Topic starter
(@keebler)
Noble Member
Joined: 18 years ago
Materdaddy wrote:I have only ever lost 1 color with just under 200 GECEs in use for 2 seasons. It actually went between seasons. I have had 2 other minor failures where data wasn't being passed to the rest of the string. Those pixels still received data, just wouldn't forward it so they're in parts bins for either end-of-pixel-string use, or other random side projects.

i too used many GECE's none of them failed


Reply
Keebler
Posts: 1691
Topic starter
(@keebler)
Noble Member
Joined: 18 years ago
Materdaddy wrote:I have only ever lost 1 color with just under 200 GECEs in use for 2 seasons. It actually went between seasons. I have had 2 other minor failures where data wasn't being passed to the rest of the string. Those pixels still received data, just wouldn't forward it so they're in parts bins for either end-of-pixel-string use, or other random side projects.

none of the GECE's that i used had any trouble. they all performed great!


Reply
Page 4 / 5
Share: