sorry if I put any of you experts in pain.. but I am clueless when it comes to this stuff.. we run LOR and now that it has been brought to my attention I was thinking of adding E1.31 .. I did run some dmx rgb spot lights with our current set up.. we were thinking of going with these pixels because they might mount flat easier than the mini bulb looking strings
http://www.diyledexpress.com/index.php?main_page=product_info&cPath=9&products_id=189
ok now say we bought 32 strings with 50 pixels each.. would the E682 run all those?
and just please confirm my thinking is right or wrong but .. LOR - E1.31 - E682 is that the way to hook them up?
not it will not ...you will need 2 of them
as e682 run 1020 pixel max so far ..1 pixel is 1 light buld witch contain 3 chanel each
50 x 32 per string = 1600 pixel
so 2 you will need and you will have spare chanel to do what ever you wish lol
someone will corect me if i am wrong
here is the info on the controler
http://sandevices.com/documents/E682_Operating_Manual.pdf
and dont forget them mini online tonigh they are talking about pixel and LOR
cherr
This is a good question and one that I hope Jim from sandevices will chime in on. I know there is an upgrade to the software and that the 682 can now run more universes (was 6 now 12). Being a newbie I am not sure if this means you can run more pixels. I look forward to any responses in this regard.
John
this thread may help you out .
http://doityourselfchristmas.com/forums/showthread.php?25082-E68X-New-Firmware-screen-capture
To answer your question , yes a e682 could control all your strings via grouping , just not discretely .
For discrete control 2x e682 would be required .
I thought there was only 12 ports on each board. I know that you can tie the strips together then you are getting into a power injection issue.
rangebob wrote:I thought there was only 12 ports on each board. I know that you can tie the strips together then you are getting into a power injection issue.
nope ..16 port we just need more univer for mega tree lol
Onewish1 wrote:sorry if I put any of you experts in pain.. but I am clueless when it comes to this stuff.. we run LOR and now that it has been brought to my attention I was thinking of adding E1.31 .. I did run some dmx rgb spot lights with our current set up.. we were thinking of going with these pixels because they might mount flat easier than the mini bulb looking stringshttp://www.diyledexpress.com/index.php?main_page=product_info&cPath=9&products_id=189
ok now say we bought 32 strings with 50 pixels each.. would the E682 run all those?
and just please confirm my thinking is right or wrong but .. LOR - E1.31 - E682 is that the way to hook them up?
Let me step in here..
The current firmware of the E682 allows for 1020 total pixels. There is new firmware that is in beta right now that will increase the total pixel count to 2040 pixels. So as of this moment you would need two controllers. When the new firmware is released you would only need one.
You will need the advanced S3 license to run pixels.
Angus, Can you explain the difference between descrete and grouping of pixels? and how it affects programming? Sorry if these questions are basic... I am still trying to learn. I have an e682 at home that needs to be assembled and a couple pixel strips to experiment with.
Thanks!
John
Johnfish211 wrote:Angus, Can you explain the difference between descrete and grouping of pixels? and how it affects programming? Sorry if these questions are basic... I am still trying to learn. I have an e682 at home that needs to be assembled and a couple pixel strips to experiment with.Thanks!
John
You can tell the controller to group multiple pixels together to behave as one. The upside is more lights with less controllers, the downside is not having control over an individual light.
I ran short on pixel contol with my pixel strip around my windows . the strip i used was 32 ic's /meter . so I configured the strip using the group command in the web config of the san device and set it to group 2 pixels to control as 1.
example for 1/2 my window , actual pixel count was 130 on cluster 2. Using the group command : group 2 2 now the controller set the pixels to be controlled to 65 and still sees all 130 pixels.
Hope this helps
