EE351 wrote:You're right, I reread your comment about the .05 sequence exported into xlights and how the problem carried over to all 3 controllers. This is really odd. Maybe it's time to dump lor?:razz:
I wish I could conslusively prove the issue. I've met Dan Baldwin and if I had a good argument he might give me the time...
BUT... LOR was written to run on LOR equipment .. E1.31, DMX and non-LOR pixels were just an addon/afterthought to stay in the game .. I doubt there would be any interest ...
I've been with LOR since 2004 and in 11 years there really hasnt been that much new development aside from SuperStar and DMX.
Maybe you are right .. maybe it is time to step out of propritary and into something else...
I just dread the idea of reworking all my sequences into something else..
I've tried xLights but miss the granular control since I do have a couple of elements that are not pixel based.
LightShowPro..... Ack... bought it once and got my $$$ back ..
Vixen ... have it but have yet to try to set it up
HLS ... Heard about it ..
I'm kind of like the monkey in the cage that you hand a banana to vertically throgh the bars and everyday I eat ... then one day hand me the banana horizontal and find me dead with my hand through the bars holding a horizontal banana.
Bob
Bob Moody wrote:I wish I could conslusively prove the issue. I've met Dan Baldwin and if I had a good argument he might give me the time...
BUT... LOR was written to run on LOR equipment .. E1.31, DMX and non-LOR pixels were just an addon/afterthought to stay in the game .. I doubt there would be any interest ...I've been with LOR since 2004 and in 11 years there really hasnt been that much new development aside from SuperStar and DMX.
Maybe you are right .. maybe it is time to step out of propritary and into something else...I just dread the idea of reworking all my sequences into something else..
I've tried xLights but miss the granular control since I do have a couple of elements that are not pixel based.
LightShowPro..... Ack... bought it once and got my $$$ back ..
Vixen ... have it but have yet to try to set it up
HLS ... Heard about it ..I'm kind of like the monkey in the cage that you hand a banana to vertically throgh the bars and everyday I eat ... then one day hand me the banana horizontal and find me dead with my hand through the bars holding a horizontal banana.
Bob
I was kidding about the LOR crack I made. I really don't know anything about it other than some people swear by it, and other people not so much.
Quick question Bob,
When you were running the V2 and V3 enc28j60 code, did you remember to make the mac addresses unique?
Yes. It took me a minute to remember that. I changed the last number and cycled the power on the switch to clear the tables.
Bob Moody wrote:Yes. It took me a minute to remember that. I changed the last number and cycled the power on the switch to clear the tables.
Ok, I just wanted to be sure this wasn't adding/causing the problems you're seeing.
Dumb questions:
what is pin 0?
jm_ws2812.spin has MAX_LEDS = 72 is this LED or Nodes. Should I change this to 50 to match what you say?
is there a good way to create a unique MAC address?
Thanx.
Scrap my first dump question. Rememberd what this means.
Sent from my GT-I9505 using Tapatalk
Matt_Edwards wrote:Dumb questions:
what is pin 0?
jm_ws2812.spin has MAX_LEDS = 72 is this LED or Nodes. Should I change this to 50 to match what you say?
is there a good way to create a unique MAC address?
Thanx.
It shouldn't matter, the top object file passes a value of 50 for the number of leds to drive per string.
Edit: I checked and all uses of this variable are commented out, it shouldn't have any effect on the program at all.
okay... who came by my house today and reworked my set up??? why do I ask ??
Becasue everything is working perfectly... So ... what did I change?
8604 is running 36 GECE's
EE_GECE_V3 is running 36 GECE's
EE_2812_v1 is running 40 WS2811's (only 36 defined in the sequence... )
I also modifed the LOR .05 sequence to make only 1 pass before it loops.
Running in LOR ... 0 missed pixels, 0 dropped/missed colors.
HOWEVER ... If i run the color change that is timed to the metronome ... there is dropped pixels and missed colors all over the place (technical term for all 3 controllers are affected)
I'm going to modify the color change beat sequence and resave it ...
I'm wondering a couple of things...
1. Did I finally stumble on the right power up sequence to get everything to enumerate properly?
2. Is LOR occasionally writing garbage (written as an XML file) when creating/saving the sequences?
Bob
I'm really thinking its LOR ...
Instead of watching the lights I ran the sequence and watched the colors blink on the screen.
I noticed that at the 12 second mark there was supposed to a WHITE event. Not only did it not engage the lights .. BUT .. it didnt blink on the screen !!!
It just flat out missed it ...
If I'm going to have be a ghost buster .. I want one of those cool plasma guns mounted to the backback ...
Bob
