115,200 baud rate p...
 
Notifications
Clear all

115,200 baud rate program pic question

20 Posts
9 Users
0 Reactions
14.9 K Views
rstehle
Posts: 4348
(@rstehle)
Illustrious Member
Joined: 19 years ago

No, just make sure that it's specs show that it is rated up to that baud rate.


Reply
Posts: 6728
(@p-short)
Illustrious Member
Joined: 19 years ago

There have been some threads on this forum where people have had problems with specific models. I think that some Ebay vendors have no idea what they are selling, so they make things up or just blindly copy specs from other models. So it is a matter of potluck, unless you find a vendor and model that someone on this forum has had positive experiences with.


Reply
Penfold
Posts: 1235
Topic starter
(@penfold)
Noble Member
Joined: 19 years ago

Ok I tried to program the chips with 115,200 baud rate and I got a dead board when I tried to run it. I have changed the baudrate in the computer setting although I can go a little higher as far as that is concerned (I think my computer will accept something like 120,000 max I believe it may be a little more then that). I changed the baudrate in my Vixen profile as well. I am running with a RS232 - RJ485 converter. I am running on Vixen beta 2.05.

I have run this Ren 24 V3.0 with a diagnostic PIC and I got blinking diagnostic LEDs.

I am thinking maybe I didn't build the code properly. I will probably try it again. Also, one final note: When I try to build I get an option of "Relocatable" and another that I can't remember off the top of my head when converting the ASM to HEX in MPLAB. Should I be clicking the Relocatable option or should I click on the other option that escapes me right now?


Reply
wvengineer
Posts: 250
(@wvengineer)
Reputable Member
Joined: 18 years ago

I guess we could add a list of known compatible serial adapters into the Wiki.. I myself do not have a wiki
account as of yet..... and i know that there are a ton of options but if we had a compendium of what
we know works would help the people just starting in this....

So far the Trendnet usb to serial TU-S9 works at 115.2k.


Reply
Reddy_Kilowatt
Posts: 547
(@reddy-kilowatt)
Honorable Member
Joined: 19 years ago

You may want to try temporarily feeding your board RS232 directly off a PC com port first.

If that works, I would look for another 485 adapter.

-Craig


Reply
Page 2 / 4
Share: