115,200 baud rate p...
 
Notifications
Clear all

115,200 baud rate program pic question

20 Posts
9 Users
0 Reactions
14.9 K Views
Posts: 987
(@wirewrap)
Noble Member
Joined: 18 years ago
Penfold wrote:UPDATE:
...
This option also worked, although I didn't like trying to solder three wires together on pin 5 of the DB9 (not enough wire length for my fat stubby fingers).
...
(and I can't solder for beans when it comes to bridging three wires together)
...

Make it easier -- Solder four!! :confused:

Actually, solder a 1-1/2 inch lead to Pin 5 on the DE-9 and then solder all four ends together. You can use a cut-off bit of wire or a food bag tie-wrap to wrap around the insulated portion to hold them together while you solder. Then insulate and tuck in a convenient corner of the housing. 😀 😀 😀


Reply
Posts: 1424
(@oldcqr)
Noble Member
Joined: 18 years ago

FYI...

I have 3 different cheap RS232 to RS485 adapters coming in the mail in the next 10 days. When I say cheap, I mean cheap. They were $5.60, $6.65, and $7.83 SHIPPED. 😮

Once they get here, I'll do some testing on how well they work at 115k.


Reply
cbell
Posts: 462
(@cbell)
Honorable Member
Joined: 18 years ago

I've had success at 115,200 using a EasySync Ltd. ES-U-1001-B10 Budget USB-RS232 adapter combined with a Hexin RS232-RS485 Converter, Model: 485, S/N: HEXIN.


Reply
rstehle
Posts: 4348
(@rstehle)
Illustrious Member
Joined: 19 years ago
cbell wrote:I've had success at 115,200 combined with a Hexin RS232-RS485 Converter, Model: 485, S/N: HEXIN.

I just got done testing 2 Renard 24's at 115,200 with the same converters! Success!!


Reply
Penfold
Posts: 1235
Topic starter
(@penfold)
Noble Member
Joined: 19 years ago

Ok....... Apparently the first batch of customizable DB9--> RJ485 that I got from Ebay were male instead of the alleged female. I finally order some more and got the proper female ones in. I used a different pair of wire cutters and stripped the three wires down to about 1/2 an inch. I soldered up a jumper wire that I got from one of the wires that aren't used in the Ren cable (It was much easier this time as I stripped more wire length this time). I hooked everything up and VIOLA she's a working perfectly!

I have a spare that I made, but I still have a customizable DB9--> RJ485 in package if anyone wants it. I will let it go FREE (shipping and handling free)! First come, first serve though. Just PM me. I am putting this opportunity out for people that want to try out their luck on this route.

**SORRY guys the customizable DB9--> RJ485 has been claimed. **


Reply
Page 4 / 4
Share: