115,200 baud rate p...
 
Notifications
Clear all

115,200 baud rate program pic question

20 Posts
9 Users
0 Reactions
14.9 K Views
Reddy_Kilowatt
Posts: 547
(@reddy-kilowatt)
Honorable Member
Joined: 19 years ago
wvengineer wrote:I guess we could add a list of known compatible serial adapters into the Wiki.. I myself do not have a wiki
account as of yet..... and i know that there are a ton of options but if we had a compendium of what
we know works would help the people just starting in this....

So far the Trendnet usb to serial TU-S9 works at 115.2k.

I don't have a wiki account either.

For RS485:

RavingLunatic, has had success with a Ren-T and a few others (myself included) with a Hexin HXSP-2108G USB to 485/422 adapter.

Let us know if find another to add to the list!

-Craig


Reply
Penfold
Posts: 1235
Topic starter
(@penfold)
Noble Member
Joined: 19 years ago

Thanks Reddy. I just purchased a Hexin HXSP-2108G USB to 485/422 adapter from Ebay. I will wait with crossed fingers.


Reply
Posts: 1424
(@oldcqr)
Noble Member
Joined: 18 years ago

I'm with Penfold here. Do we need Absolute or Relocatable code?


Reply
Posts: 6728
(@p-short)
Illustrious Member
Joined: 19 years ago

It has never asked me that question. But then I haven't updated my software in a long time... My guess is that 'relocatable' is for when you are linking several different software modules together. Since we aren't doing that (everything is in one file), I would vote for absolute. My further guess is that there won't be any harm if you get it wrong, that it will stop you before you get to programming the actual chip.


Reply
Penfold
Posts: 1235
Topic starter
(@penfold)
Noble Member
Joined: 19 years ago

UPDATE: I have now gotten the Hexin HXSP-2108G and after tinkering with the wire setup I now have the Renard 24 running on 115,200!!

Also, I bought the customizable DB9--> RJ485 that Kevin recomended on his page. This option also worked, although I didn't like trying to solder three wires together on pin 5 of the DB9 (not enough wire length for my fat stubby fingers). Furthermore, when connected to the serial port I couldn't screw in the thumb screws to the serial port. Even though this option was two times cheaper I don't think I will go with this option as I am afraid of the adapter being so loose (and I can't solder for beans when it comes to bridging three wires together). This is my experience and others may not have a problem with the customizable DB9--> RJ485. I am just reporting on my findings and preferences.


Reply
Page 3 / 4
Share: