SX28 Firmware
 
Notifications
Clear all

SX28 Firmware

1 Posts
1 Users
0 Reactions
2,198 Views
Posts: 477
Topic starter
(@lboucher)
Honorable Member
Joined: 18 years ago
[#6696]

Hi All

I am a NEWB to the field and thought i would go a different route and use the parallax SX28 microcontroller. I have it up and running fine, thought i would post the code. It is by no means optomized, but it works and i can read it. It is set up to work with Vixen Renard Version 1. Serial Settings are 38400 baud 8 data bits None parity an 2 stop bits. The 2 stop bits eliminates a weird problem i had with random bright flashes on the 2nd controller in the line.

Read all about that here.
http://forums.parallax.com/forums/default.aspx?f=7&m=335848

This supports 17 channels, and they are generally linearized. (I cannot claim the linearization is really really good, because i just copied the table from someone else, but it looks good.)


Share: