@Skunberg: He said:
although he did not specifically mention length and bulb spacing I think they would have to be more than 5ft total length.
My bad.
So this IS a mini tree, say's so on the light box VBG
dirknerkle wrote:Nope, the strings are actually 5' long. Bulbs are on 3" centers.
Ahh, I figured they were the Walmart Strings but I didn't have a box nearby to check the length.
Dave/Dirk:
I'm having trouble finding strings as you've shown here -- I want to use LEDs and such short strings with short centers are proving difficult to find.
Since you've built one of these, could you give me your assessment on whether it could be slightly taller but with a lot more strings? I'm thinking of using a dozen Creative Displays M6 LEDs in 50-counts, 17 feet, and running them over the top, resulting in an 8-foot tree with a 3-foot diameter base.
I'm worried that the overall weight would prove to be too much for the hooks on the top.
Your thoughts would be appreciated.
\dmc
dmcole wrote:Dave/Dirk:I'm having trouble finding strings as you've shown here -- I want to use LEDs and such short strings with short centers are proving difficult to find.
Since you've built one of these, could you give me your assessment on whether it could be slightly taller but with a lot more strings? I'm thinking of using a dozen Creative Displays M6 LEDs in 50-counts, 17 feet, and running them over the top, resulting in an 8-foot tree with a 3-foot diameter base.
I'm worried that the overall weight would prove to be too much for the hooks on the top.
Your thoughts would be appreciated.
\dmc
Hmmmm... with 4 hooks and 4, five-foot strings each, the hooks I used are probably overkill. I don't know what their maximum weight bearing capabilities are, but they are strong enough to support 4 100-count strings each if that's any help. You could also upgrade the hooks to a slightly larger size and/or just use more of them, which would distribute the weight, too.
One issue might be the center pole, which if it's PVC, the longer it is the less lateral integrity it will have. You might have to beef up the pole a bit to go to 8'. The beauty of the general megatree idea though is that weight is universally distributed downward instead of to one side or another, so the only lateral force would likely be wind -- the higher the tree of course, the more susceptible it would be to that.
When I made my megatree, I used 3 hooks and a piece of PVC with holes drilled for zip ties that held up the lights (pictures below). The same kind of idea might be helpful to you if weight is a consideration. And instead of the hooks, you might be able to just put a single pin through the top of the tree to hold it up; remove the pin afterward and slide the top and all the lights down to the bottom, pull the center pole out of the base connector, wrap it in a bag and it'd be easy to store.
Thanks. As always, you're a font of both information and ideas.
\dmc
