Rotating MEGA TREE?...
 
Notifications
Clear all

Rotating MEGA TREE???

27 Posts
13 Users
0 Reactions
14.3 K Views
Posts: 368
Topic starter
(@henkvis)
Honorable Member
Joined: 18 years ago
[#10116]

Hi there,

Happy new year.....

Now the season is over (will stop tonight), i'm already full of new ideas for the end of this year (leaping arches will be one of them).

But I was thinking on a rotating Mega tree.
I mean, you take a good size frequency controlled electro motor and just start spinning the megatree around.

I my head, you can make some nice chases, flashes etc... when using strings spirally or horizontally or just spot lights....

Did anyone already have some experience with this of thought about this?

Just curious....


26 Replies
Posts: 27
(@crypted1)
Eminent Member
Joined: 17 years ago

This can be done, but I'm wondering how you would run Power to your boards? I'm assuming that you would mount the boards on the main pole in the middle of the tree. The only way I can think of is to use a 2 channel brush system. One for the hot wire and one fo the neutral wire. You could do the data wireless so thats no the issue. Also few motors have the torque required to spin a big'ol tree. You could fork out the mony for a stepper moter but need a regulated, filtered 24 V powersupply and some type of control. A servo would be too big, normal 120V motors will spin too fast. So you need a gear box for this. That would allow you to buy a smaller cheeper motor and it can be a "dumb" motor.( 120V plug in, no feedback like a servo or stepper) And if your going to buy a gearbox you might as well buy a "wet" gearbox, meaning thats its filled with oil to keep the gears cool. I know you'll be using it in the dead of winter, but gearboxes do heat up.
You really have me thinking on this now... my gears are turning on how it can be done. If you need help... PM or ask. I'm here most of the day.;)


Reply
Posts: 27
(@crypted1)
Eminent Member
Joined: 17 years ago

If you Google "Electrical Slip Ring" you'll get an idea of what I was talking about...


Reply
Aurbo99
Posts: 2804
Moderator
(@aurbo99)
Member
Joined: 19 years ago

Henkvis,

and electrical slip ring would work, but it would be extremely dangerous that low to the ground.

I would suggest you spin your mega tree using your controllers. Nobody will notice the tree physically moving in the dark.

You may recall my pm a few weeks back asking for closer images of you friends mega-tree.

If you take his design and where it cuts back to make the first and second ring of boughs, you separate the strings of lights into 3 sections. One section for each bough ring.

It triples your channel count but the effect would be a 3 layer mega capable of rotating through sequencing. if your using different colors, you can have 3 zones of colors rotating around the tree at different speeds, fades etc..

This is what I was experimenting with that I wanted a closer look at you friends tree build for.

This will work but you'll need a beefy center pole to accommodate the extra power lines. normally you have your power plugs at the base of the tree, and they would remain there, but then each bough would become in essence the base for that bough. this means you'd need to carry extra power lines up the center pole to each bough ring.

you will end up with a traditional pine tree look with 3 layers each layer independent from the next.


Reply
Posts: 368
Topic starter
(@henkvis)
Honorable Member
Joined: 18 years ago

Thank already for your suggestions...
Indeed I kind of slip ring would do the trick. I don't see any big issues in that.
Only, the speed of what I was thinking of was around 1500RPM.
That is quite some speed and therefore I made the following drawing....

I know everybody calls me stupid, but I was thinking maybe of incorporating an messageboard like this: http://www.ledcontrol.narod.ru/eng/led_panel.htm

For that I need this rapidly spinning tree, but I think I can also create great effects by using iso top-bottom strings, spirally wound strings and horizontal strings. And even strobes are nice to have inside......

Crazy? Maybe??

megatree

Reply
dirknerkle
Posts: 10310
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

At 1500 RPM you won't be able to keep many things on that tree. At 15 RPM you might have a chance....


Reply
Aurbo99
Posts: 2804
Moderator
(@aurbo99)
Member
Joined: 19 years ago

Jebus! 1500 rpm!

a Whirling Dervish comes to mind..

Cap't were ready for take off!


Reply
Posts: 2168
(@djulien)
Noble Member
Joined: 19 years ago
henkvis wrote:Indeed I kind of slip ring would do the trick. I don't see any big issues in that.
Only, the speed of what I was thinking of was around 1500RPM.
That is quite some speed and therefore I made the following drawing....

I know everybody calls me stupid, but I was thinking maybe of incorporating an messageboard like this: http://www.ledcontrol.narod.ru/eng/led_panel.htm

For that I need this rapidly spinning tree, but I think I can also create great effects by using iso top-bottom strings, spirally wound strings and horizontal strings. And even strobes are nice to have inside......

I think it is a great idea. There are a few technical challenges, but if you can work thru those, then this would be a very cool way to get a "tree-triks" with the minimum number of lights. I started to look into something similar last year, but didn't follow thru due to too many other projects.

For the slip rings, you could add a third ring to carry data. I read an article by someone on the web who used ballbearings for sliprings, and they found that data could be reliably transferred thru the slip ring at 12 VDC (lower than that resulted in mechanical noise interfering with the data too much), but I guess it depends on what kind of sliprings you use.

You actually don't need an entire "tree" - just 1 - 3 branches of it. Together with the POV effect, the rest of the tree will be "filled in" during rotation. So it would resemble more of an egg-beater than a traditional tree when stationary, with nothing more than 1 - 3 wireframes forming the outline of the tree. This will make it substantially lighter, and more feasible to spin reliably at that speed. The wireframes obviously would need to be equally spaced and weight balanced for a smooth rotation.

You will need to use LEDs for the lights. Incandescent cannot be turned on/off fast enough (you'd just get a blur rather than discrete "pixels"). You also need to be careful about using PWM on the LEDs - it either needs to be fairly high frequency, or just continuous-burning LEDs (otherwise you'll see dashes rather than solid lines/pixels as the tree rotates). If you will be doing RGB and want the colors to mix well, you'll also need to take into account the time delay between colors (otherwise you'll get R, G, or B "edges" on the pixels or lines, due to the rotation).

An easy way to prototype this would be to use a SpokePOV or a box fan (I used a box fan, with the LEDs on one of the blades and batteries at the center; I didn't bother with the slip ring at that early stage).

don


Reply
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago

You might do a forum seach on PlanetChristmas - I know there was someone there trying to do exactly the same thing - it not only was going to rotate/spin (think ferris wheel) but also rotate back to a mega-tree shape. Don't think he ever got it running - at least I never saw pictures of it but he might have some ideas for you...


Reply
dirknerkle
Posts: 10310
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

I have this picture in my mind of applying power to the tree, and as it gains in rotational speed, the centrifugal force increases to where branches, a slightly loose cable, etc. start exiting the tree, swinging wildly around and eventually the tree gets out of balance, breaks off the shaft and now this fast-spinning "weapon of death" hits the ground and takes off down the street, caroming off cars... 😯

Make sure you get video... it would go viral in a New York minute...


Reply
Page 1 / 3
Share: