Rotating MEGA TREE?...
 
Notifications
Clear all

Rotating MEGA TREE???

27 Posts
13 Users
0 Reactions
14.3 K Views
rstehle
Posts: 4348
(@rstehle)
Illustrious Member
Joined: 19 years ago
dirknerkle wrote:I have this picture in my mind of applying power to the tree, and as it gains in rotational speed, the centrifugal force increases to where branches, a slightly loose cable, etc. start exiting the tree, swinging wildly around and eventually the tree gets out of balance, breaks off the shaft and now this fast-spinning "weapon of death" hits the ground and takes off down the street, caroming off cars... 😯

Make sure you get video... it would go viral in a New York minute...

ROFL, that is what I was thinking too. At that rotational speed, it would have to be perfectly balanced or it won't be standing upright long........;)
Also, (if it did stay together) due to centrifugal force, it may end up looking more like a Mega Balloon than a tree...........:(


Reply
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago
dirknerkle wrote:I have this picture in my mind of applying power to the tree, and as it gains in rotational speed, the centrifugal force increases to where branches, a slightly loose cable, etc. start exiting the tree, swinging wildly around and eventually the tree gets out of balance, breaks off the shaft and now this fast-spinning "weapon of death" hits the ground and takes off down the street, caroming off cars... 😯

Make sure you get video... it would go viral in a New York minute...

Yeah... and that's a problem? :rolleyes:

Gotta admit - - until the police pick you up or your neighbors pitch-fork you, it would be pretty cool... :p


Reply
Posts: 368
Topic starter
(@henkvis)
Honorable Member
Joined: 18 years ago

GREAT REACTIONS.........

I know it can be a weapon of death.... but it's only a thought (yet :rolleyes:)
But indeed some other ideas:

make a separate rotating message board and take a slower rotating megatree, but I keep all ideas open.....

BTW, does anybody know if such a rotating message board could be controlled by Vixen???


Reply
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago

Well - - LEDTriks/Triks-C supports rotating text and it can be controlled by Vixen via scripts...


Reply
mrpackethead
Posts: 2289
(@mrpackethead)
Famed Member
Joined: 19 years ago

wow! at 1500rpm the rotational inertia in that thing will be lethal! If anything flew off it it would be a high speed projectile.. Thes projects that spin lightweight arms of leds, but we are talking MUCH smaller, and much lighter... Even getting that thing up to 1500rpm will be quite an acheviment.. You'll need to keep it balanced perfectly as well.
Certainly not impossible but going to be really hard work..

Id approach the old mega tree in a different fashion, and just put lots of individually controllable leds on it. Its safe and and it works. ( see

)


Reply
Posts: 368
Topic starter
(@henkvis)
Honorable Member
Joined: 18 years ago
mrpackethead wrote:

Id approach the old mega tree in a different fashion, and just put lots of individually controllable leds on it. Its safe and and it works.

Yeah, totally safe, I must agree BUT by far too expensive for me.....

Need to search for other solutions....


Reply
Virtus
Posts: 1182
(@virtus)
Noble Member
Joined: 19 years ago

This link is to a small scale commercial product video that I think is similar in concept.

http://fliiby.com/file/491626/rjpngrt3az.html


Reply
BuzzKill
Posts: 577
(@buzzkill)
Honorable Member
Joined: 19 years ago

Okay .. I am going to say that I can't see the emperor's new clothes here...

The lights can already give the illusion of moving around. You can achieve the effect visually in software. This sounds like a LOT of complexity for limited addtional visual impact. I don't want to step on your vision here, but this sounds a lot like one of those "This looks great on paper, but..." scenarios.


Reply
Posts: 2168
(@djulien)
Noble Member
Joined: 19 years ago
henkvis wrote:and take a slower rotating megatree

How did you choose 1500 RPM? The literature says that the SpokePOV works at 7 - 15 MPH (depending on the number of spokes), which would be ~ 200 - 300 RPM on a 2 ft dia wheel. On a 6 ft diameter tree with the same brightness and timing, that would be ~ 600 - 900 RPM.

don


Reply
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago

Here's the thread on PC: http://forums.planetchristmas.com/showthread.php?t=32779

Doesn't look like he got it running...


Reply
Page 2 / 3
Share: