Quick mega-midi-min...
 
Notifications
Clear all

Quick mega-midi-mini tree

15 Posts
7 Users
0 Reactions
7,927 Views
dirknerkle
Posts: 10310
Topic starter
(@dirknerkle)
Illustrious Member
Joined: 18 years ago
[#11579]

I didn't know what to call this thing, so I thought the thread title would cover all the bases... 😉

Parts list:
1" PVC for center trunk (60" long)
1/2" PVC for spokes (each spoke about 17" long)
1/2" underground sprinkler riser pipe (about 9'-5") (comes in 50-foot flexible rolls)
1- 1/2" sprinkler pipe joint
4-1/2" PVC "T" connectors
1- 4-way 1/2" PVC connector
1- 1" PVC end cap
1- 3" 1/4-20 bolt, washers, nut
4- 1"screw hooks
32 zip ties
16- 20 count light strings
PVC cement
Black spray paint

How to build:
Drill a hole through the 1" end cap and through the middle of the 4-way PVC connector. Bolt the end cap to the top of the 4-way connector (picture 2). Thread the sprinkler riser pipe through the four PVC "T" connectors and use the sprinkler pipe joint to lock the two ends together - it's a very tight fit (picture 3). Cut four spokes so that the length is equal and will fit from the "T" connectors into the 4-way hub in the middle. These will be about 17" long (picture 4). Cut a 60" length of 1" PVC (half of a normal 10' length) and insert it into the end cap which is now in the center hub (picture 1). If all is good and you like the dimensions, use the PVC cement to make it permanant (or just drill holes through all the joints and use extra zip ties to secure the joints so they don't come apart.) Drill 4 small holes near the top of the center pipe and screw in the four hooks. Paint it black. Hang 4 strings of lights on each of the hooks. I used a zip tie as a strain relief ahead of the last bulb on the end of the string (picture #5) Affix the lights around the base ring with zip ties. I also drilled small holes for the zip ties in the base ring to keep spacing consistent. Mount in the yard with four yard spikes over the base ring. Total construction time: about 90-minutes.

Sequencing is the same as a typical megatree -- use spins, etc..


14 Replies
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago

The Amazing Dirkmeister does it again - I love the simplicity of it and who doesn't like PVC?! I don't have a big yard so these would work out pretty well - - but - - great - thanks a lot - yet another project I don't have time for!

Edit - I've been looking at the Spiral Tree Calculator on PC - might be a good addition to this: http://forums.planetchristmas.com/showthread.php/39539-Spiral-Tree-Calculating-Spreadsheet/page6


Reply
N7XG
Posts: 480
 N7XG
Guest
(@n7xg)
Member
Joined: 19 years ago

Way cool,

Do you deliver?


Reply
dirknerkle
Posts: 10310
Topic starter
(@dirknerkle)
Illustrious Member
Joined: 18 years ago
N7XG wrote:Way cool,

Do you deliver?

You have no idea how many packing peanuts it takes to ship one of these things. The tree costs about $5 to make. Packing peanuts are another $4,000. :p


Reply
dmcole
Posts: 2196
(@dmcole)
Noble Member
Joined: 19 years ago
dirknerkle wrote:I didn't know what to call this thing, so I thought the thread title would cover all the bases... 😉

This is definitely a "midi-tree" ... bigger than a mini-tree, smaller than a mega-tree.

I actually need one of these to fill the spot that a commercial metal-with-folding-limbs thing used to stand (and trip a GFCI every night).

Thanks for documenting this.

\dmc


Reply
Posts: 4092
(@skunberg)
Famed Member
Joined: 18 years ago

Let's see, four strings on each hook, four hooks, that's sixteen strings of lights. So what type of lights are you using (bulb count, length, spacing)?


Reply
dirknerkle
Posts: 10310
Topic starter
(@dirknerkle)
Illustrious Member
Joined: 18 years ago
Skunberg wrote:Let's see, four strings on each hook, four hooks, that's sixteen strings of lights. So what type of lights are you using (bulb count, length, spacing)?

I used 20-count strings. They're about 6-1/2' long from end to end and use 6v bulbs. (Actually, I picked them up from Joel at the Minnesota Mini.) Didn't have to modify anything -- took 'em out of the box, let them hang for a couple days in a hot garage to stretch out the kinks, and slapped 'em on.

This is an example of building the display to fit the strings instead of trying to modify the strings to fit the display. It's why it took only 90 minutes from start to finish, too. 😎


Reply
Posts: 3277
 Jrd
(@jrd)
Famed Member
Joined: 19 years ago

@Skunberg: He said:

dirknerkle wrote:16- 20 count light strings

although he did not specifically mention length and bulb spacing I think they would have to be more than 5ft total length.

I made a midi tree sorta similar to this in '07 although it wasn't PVC it was rebar. I hammered a piece around 6ft long into the ground almost a foot with a 1/8th inch hole through it about an inch from the top for a piece of copper wire to go through to hold the lights up. I anchored the 100ct light strings to the ground with 8-12"(don't remember the exact length) screws left over from doing our roof.

DSC04935
DSC04941
DSC04944
DSC04950

Reply
kwajtony
Posts: 118
(@kwajtony)
Estimable Member
Joined: 17 years ago

cool design.


Reply
dirknerkle
Posts: 10310
Topic starter
(@dirknerkle)
Illustrious Member
Joined: 18 years ago
Jrd wrote:@Skunberg: He said:

although he did not specifically mention length and bulb spacing I think they would have to be more than 5ft total length.

Nope, the strings are actually 5' long. Bulbs are on 3" centers.


Reply
Page 1 / 2
Share: