I posted eariler in the week I was thinking on switching from my firework to a mega tree. I set up some test stuff in Vixen last night and then showed my wife, the response I got was that is boring lol. I guess she likes the firework. So I am wondering in your preview is there a way to make the tree look more 3d like? That is part 1. Part 2 has anyone done a 12 ft mega tree 3 colors with no guy wires. I know there is a ton of info on this but I will ask 1 more thing. If I use 24 channels 3 colors what is my max height I can use and still look full.
Thank you
John
Last one 8 strings 3 colors fullness. Very VERY subjective. Some people have strings a foot and a half apart and call it full. Others have strings 6 inches apart and think it's not full enough. Yes height effects this but height and angle give the look you want first (short and fat or tall and skinny) then how many strings you need to get the fullness you want. Also most people use string length to drive height. My personal take on this anyway.
olingerjccj wrote:I posted eariler in the week I was thinking on switching from my firework to a mega tree. I set up some test stuff in Vixen last night and then showed my wife, the response I got was that is boring lol. I guess she likes the firework. So I am wondering in your preview is there a way to make the tree look more 3d like? That is part 1. Part 2 has anyone done a 12 ft mega tree 3 colors with no guy wires. I know there is a ton of info on this but I will ask 1 more thing. If I use 24 channels 3 colors what is my max height I can use and still look full.Thank you
John
I wouldn't go without guy wires, i tried that one, and my tree wound up 15ft away from it's starting location in a bad windstorm. However, it is possible to use few channels and make it look full. i had 15 channels and 40 strands, it all depends on how many strands you want on each channel. I had 4 white on 1ch, or 2 green on 1 channel or 2 red on one channel, for a total of 20 white, 10 green, 10 red. height was about 10-12ft, diameter was about 6' and spacing was about 6".
YMMV
cool, here is what I do know. I will have 24 channels, 3 colors. Now per channels I will use 3 strands of 100ct minis like 23ft each. So 20ft is looking like the way I am gonna go.Ch 1 up,down up ect. 72 strands. I was thinking on cutting a circle out of plywood for my base then stapling the lights to that . The pole will be concreted in. So just cut a hole in the center of the plywood slide it over, And just put some cinder blocks on it paint them as presents. Cheaper the better for this year.
Thanks
John
That is exactly how mine is set up. Worked like a charm and had absolutley no problems last year:
Parts needed:
1. 10 -12 ft piece of 3" pvc
2. 6 - 8 ft 2x4
3. Sledge hammer
Directions:
1. Measure the inside diameter of the 3" pvc
2. Rip the 2x4 length wise to the measurement you just took
3. Cut a "V" into the bottom tip of the 2 x 4
4. Drive the 2 x 4 into the ground 2 - 3 ft with the sledge
5. Slide the pvc over the 2 x 4
I cut slots into the top of my pvc for the lights. I added the lights to the pvc before I slide it over the 2x4
i made an 11ft mega tree last year and had no issues. the way i did was to bury 2 1/2 feet of 3in pvc in the ground. Then glued to that i had a swcrew together coupler. then i took a 6 foot peice and a 5 foot peice and had those to attached together with screw togther couplers. then for added support i put a 2 1/2 in 10 foot peice of pvc inside of the 3 in for support then the 11 foot 3in pvc was screwed into the 3 in pvc in the ground. no guy wires and had several bad storms last year. some light strands came loose from the stakes in the ground but nothing damaged.
What would be cool, granted if you could get the strands tight enough and they will stretch but use them for the guy wires and then create a sprial tree on top of that. I have so many Ideas it is hard to focus. :rolleyes:
John
olingerjccj wrote:What would be cool, granted if you could get the strands tight enough and they will stretch but use them for the guy wires and then create a sprial tree on top of that. I have so many Ideas it is hard to focus. :rolleyes:John
Similar to what i have planned. My mega tree uses 16 super strings (1/16th cable together with light strings for guy wires) 100ct 23ft. A 20ft flag pole. And I plan to have 8 140ct strings spiral on top of the super strings. I hope the pole can hold all the weight.
olingerjccj wrote:What would be cool, granted if you could get the strands tight enough and they will stretch but use them for the guy wires and then create a sprial tree on top of that. I have so many Ideas it is hard to focus. :rolleyes:John
I would not suggest depending on the light strings to keep the tree in place. The wire and light bulbs will stretch over time and become looser. With all those lights it presents a much bigger profile to the wind and the wind WILL blow it over, unless your pole is anchored correctly.
My PVC megatree is only 12 feet tall, and the one year I didn't use guy wires, it got blown over during a storm. Luckly no major structural issues. Just using 2-3 guy wires to keep it from moving too much will help immensely. You can't see the wires during your show.
Another option you could look at is the JUMP (Jack Up Mega Pole). It's discussed over on PlanetChristmas at planetchristmas.com. I don't think it needs guy wires, but it's heavily anchored to the ground.
True on the weight, I decided not to do a sprial/mega tree I just feel too much weight. I do plan to concrete in my foundation for my pole. I was going to do a smaller one 12ft but now I want a 20ft tree. So I feel that would be the only way. I measured the spot the other day and 20ft is huge + my 1 ch star. So to get back on point lol, I have been over to PC and saw the jump method also there is a couple other ones but really have not dug into the specs yet. Hopefully this weekend I will pick my final design.
John
