Mega tree not displ...
 
Notifications
Clear all

Mega tree not displaying correctly

3 Posts
3 Users
0 Reactions
4,742 Views
Posts: 18
Topic starter
(@tnob1)
Eminent Member
Joined: 11 years ago
[#49995]

I built a 16 string mega tree with 30 pix high and 480 total pixels. I power inject every 4 folds and run the pixels at 40%. im running the tree on a falcon expansion board hooked up to the F16V3 DMX port 1. I dont have zig set on the controller as i want all settings in X lights but i have tried every possible configuration i can and it doesn't seem to fix the issues i have. I have the 4 ports on the F16v3 set to 13-16 ports.

original setting was
2 strings of 240
8 strands per string
But i have tried all 480 on 1 string also.

However im having a problem when i run a sequence across the tree from left to right it seems fine, but when i run the effect from bottom up or top down what shows up on the tree is all messed up and does not reflect what i built.

on a second note - when i run the txt effect to say Merry Christmas it displays twice at the same time on the tree one low and one high instead of once in the middle like Xlights shows. Also the Galaxy effect shows 2 swirls on the tree even though xlights shows 1.

any thoughts?


2 Replies
aknflyer
Posts: 371
(@aknflyer)
Reputable Member
Joined: 10 years ago

You will probably have to post your settings pages on the falcon at least to get any responses. I dont speak DMX. Or get on a zoom session for help. The link is under the help menu in xlights. You will need zoom installed and setup for that to work.


Reply
Posts: 376
(@k-state-fan)
Reputable Member
Joined: 16 years ago

How do you have it physically wired? I your post I see 16 strings, 2 strings, 1 string.

post a pic of your xlights layout and fpp settings and controller settings.


Reply
Share: