Well I jinxed myself with I more follow up. I changed the db cable to the Ren24 specs and I till have the same prob. I also took out all the jp1 jumpers. BTW it is version 3.3. I don't get it all of these worked on the test bench. I feel it is the cable from the ren24 to the 24ss but i changed it unless I am making it wrong? So I guess tomorrow If I do not fix it I will have to change the 24 to last in line blows my Thanksgiving send off oh well. I did buy 6 db connectors in case since radio shack is closed tomm.
John
Ok, this may sound unlikely but here is something to try:
Take U4 from the last Renard SS24 and put it in the location of the output 485 chip on the Renard 24 (on the right side under the COMM OUT connector).
BTW: Ren 24 Ver 3.3 is wired like the Ren SS24 so only a straight thru cable is needed between the boards.
I got the 1st 4 controllers working. I just had to switch the ren24 for another controller. The ren24 will just have to go last. I know it has incoming data so it should be fine. My neighbors think I am crazy. I was out there working on stuff at 6am. Switching controllers was not easy but now I can have my 3 song show for tonight. Need to transfer all my other sequences still. Wife was kinda mad since she had to clean house now that I got it working.
Happy Thanksgiving
John
