soakes94 wrote:Im using the Lynx USB dongle and it was connected to some ren48LSD's. I can always just make some of the circuit boards from here, its just I have some PIC16F688 lying around and I already know how to build the required circuit to run one. I really just want to be able to put a PIC16F688 inside each of my RGB floods and then be able to control all the colours individually and have a strobe function. Just now my RGB floods all connect upto a ren48lsd and it works but its just a hassle since there is alot of cable all going to one place. It would be nicer and "cooler" if it all just daisy chained around my garden.I feel the same about finding time todo all of this stuff, I would have started todo things around april/may time but this year has been crazy. I have been doing diffirent jobs here and there, finishing school and now I'm having to pay to keep my car on the road so I cant afford to much lighting stuff 🙁
But... is that one strobe channel for the ENTIRE device (blue and red strobe at the same time) or one per channel (blue solid with a red strobe)?
(adding 1 .. or 8 DMX channels per chip)
FYI -- pic based 8 channel DMX dimmer
Original discussion:
A Night of Playing with Eagle
Yeah 1 strobe channel for the entire device. Lets say I had channel 1 as the strobe channel and 2-9 as the outputs, whatever is turned on channels 2-9 would all strobe when channel 1 was active. I hope that makes sense, so it would be like a RGB Par can. I think they are usually something like: Ch1 - Red intensity, Ch2 - Green intensity, Ch3 - Blue Intensity, Ch4 Strobe
If you were hoping to replace the 48LSD pics, this gets much more complicated, as your RGB grouping would end up spanning PICs. Thus making the "Strobe channel"
much more complicated. If we are *only* considering a dedicated device (RGB or RGBA/W), it may be doable. Will have to review to see if there is a spare timer
available in the FW. The impact to the output would be an extra AND command, and as we would only need to track at most 4 channels, there should be plenty of cycles.
My plan was just to use the same pics that the 48LSD uses, and either run RGBRGB from the pic or just RGB and because its DMX I can overlap channels if that makes sense. Or like you say I could run RGBWRGBW or something like that. I was looking at some atmega stuff as well, it looks a little more suited to this kind of stuff maybe?
I have found this, it looks like what I want, I need to have a better look at the schematic but I think it could work and the chips dont look to expensive and it gives me a nice digital display.
Ive made a schematic for it, I know its a bit messy but does it all look okay? I will order the parts, its only a few anyway and give it a run and see how it goes. Does anyone know how I would program the chip? It will need a bootloader as well? Not sure what that is, I'm new to atmega stuff.
Stephen

