Barnabybear wrote:Acording to the data sheet - with RE and DE low and no input, RO is high. You might want to check by forcing one input high and one ...
Just a complete random thought, how powerful is the oscillator? Heres my thought, could I run a clock line between the boards? So the first board has ...
Tried it with the hex file compiled by budude and still nothing, I have a constant 5V coming from my ST485 chip on pin 1, im wondering now if its data...
budude wrote:No - if it's truly Ren48-like then it needs to be a source (or in this parlance - non-sinking) or active High since it powers on the tran...
The size of the hex file is about 1.5kb I think. Not sure if this seems right or not. I'm still not getting output from my pic, there is just a consta...
Ive attached my asm file, would someone be willing to convert it into a HEX file for me? Just incase Im doing something wrong when it comes to compili...
budude wrote:You mentioned your project is Ren48-like - what exactly are your output drivers - is it NPN transistors as it uses or are you using somet...
I have tried programming the pics with the code provided by RavingLunatic but as soon as I apply power the LEDS are lighting up, it doesnt matter if D...
P. Short wrote:Just for reference, is the problem that you can't find any oscillator local in the UK, you can't find one with that particular frequenc...
RavingLunatic wrote:If you are going to use only the DMX firmware, then using the internal oscillator is no problem. If you know that you aren't goin...
Does anyone have any going spare that I could buy from them? Jameco are asking for $12 to post 10 out making my order $25.54. Cheers Steve
tstraub wrote:I'm not sure how many total channels you have but if you have a low channel count show you could skip the oscillator and run the PIC on ...
Hopefully this picture will make it a bit clearer, the strip in the picture is connected to a 5V powersupply, the strip needs 12V to run on full brigh...
phillikl wrote:Blue and green should be around 470 ohm 1/2 watt. Keep in mind that resistor values can adjust frequency of light being emitted (if yo...
