DMX PIC with strobe...
 
Notifications
Clear all

DMX PIC with strobe function?

15 Posts
4 Users
0 Reactions
7,443 Views
dirknerkle
Posts: 10310
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

DIGWDF has a 675 controller, with a PIC12F675 chip on board, that is line-powered by the "ON" signal from a board such as an LSD. When you turn the channel ON and the 675 board fires up, the firmware in the 12F675 chip takes over and can control up to four additional SSRs. It'd be a piece of cake to modify the firmware to fire a strobe.... or two strobes, or three... or even four... as long as the strobes are powered separately. The 675 controller only sends the trigger signal.

Just an idea...


Reply
Materdaddy
Posts: 2368
(@materdaddy)
Famed Member
Joined: 16 years ago
dirknerkle wrote:DIGWDF has a 675 controller, with a PIC12F675 chip on board, that is line-powered by the "ON" signal from a board such as an LSD. When you turn the channel ON and the 675 board fires up, the firmware in the 12F675 chip takes over and can control up to four additional SSRs. It'd be a piece of cake to modify the firmware to fire a strobe.... or two strobes, or three... or even four... as long as the strobes are powered separately. The 675 controller only sends the trigger signal.

Just an idea...

Speaking of which... do you have any code whipped up for such a task? One of my many TODOs for this year is use those 675 boards I bought from you to randomize some strobes that will be attached to DirkCheap SSRs or even more likely the Mega DirkCheap SSRs (which I still need to order the optos for)!


Reply
dirknerkle
Posts: 10310
(@dirknerkle)
Illustrious Member
Joined: 18 years ago
Materdaddy wrote:Speaking of which... do you have any code whipped up for such a task? One of my many TODOs for this year is use those 675 boards I bought from you to randomize some strobes that will be attached to DirkCheap SSRs or even more likely the Mega DirkCheap SSRs (which I still need to order the optos for)!

The 675 kit in my store has a downloads page -- the asm is there for the taking...


Reply
Materdaddy
Posts: 2368
(@materdaddy)
Famed Member
Joined: 16 years ago
dirknerkle wrote:The 675 kit in my store has a downloads page -- the asm is there for the taking...

yeah... I was trying to trick you into doing the work of creating an ASM with randomized output for me. Unfortunately for me, you're brighter than those engineers you employ at your factory and saw right through it!


Reply
Posts: 393
Topic starter
(@soakes94)
Honorable Member
Joined: 18 years ago

This is probably a silly question but oh well. Its been a few months since I have done anything like this and I cant remember, but on the atmega168 chip, am I right in thinking that to run the chip I need to apply 5V to the RST pin with a 10K resistor? Or do I only apply the 5V to reset or to program?

Cheers


Reply
Page 3 / 3
Share: