DMX PIC with strobe...
 
Notifications
Clear all

DMX PIC with strobe function?

15 Posts
4 Users
0 Reactions
7,443 Views
Posts: 393
Topic starter
(@soakes94)
Honorable Member
Joined: 18 years ago
[#20770]

Im wondering if someone here can help me since I am stuck. I am using the PIC16F688 with the DMX renard code to control LED fixtures, usually RGB stuff. Sometimes I try to strobe to lights through the software sometimes Vixen and sometimes Freestyler, this doesnt always work right especially if the strobe is to fast.

What I want to know is, is it possible to have another channel that strobes the output of the PIC. So Something like this where channel 1 is dimmer and strobe and channel 2-9 are outputs. I sadly have hardly any code writing skills.

Thanks
Stephen


14 Replies
LabRat
Posts: 2981
(@labrat)
Famed Member
Joined: 17 years ago

DMX should be capable of 40 fps (Frames per second), so the "lack of strobe" is a bit surprising. I understand your request, and it *may* be possible (the issue being that every extra instruction that is executed increases the chance(s) that the DMX parsing code is not going to be fast enough, and you will stop being able to read the DMX data stream effectively). But it seems to me that the existing HW/FW should be capable of this, and tweaking your Vixen sequence may be a much easier solution.

Can you describe your sequence? (what's your sampling rate (50ms, 25 ms?)? How are you generating the "strobe" effect). What LED devices are you using? What options do you currently have selected in the Firmware build? (PWM, DC etc etc?).


Reply
Posts: 393
Topic starter
(@soakes94)
Honorable Member
Joined: 18 years ago

I was mainly using freestyler, because of the way my setup is sequences would be pointless so I usually just run basic chasses and fades in freestyler. Now I remember it, it was a chase and I was able to run it upto a certain speed and then everything just kind of jumped around and it wasnt a smooth chase anymore. Also I want the strobe function to save me the time of having to program a strobe effect. I could simply just activate channel 1 to something like 200 and it would strobe at 8Hz or something like that.

Steve


Reply
LabRat
Posts: 2981
(@labrat)
Famed Member
Joined: 17 years ago

What are you using as your DMX adapter? (just trying to understand the setup)
(I'll try and look at the FW... but I'm not having much luck finding blinky time these days (start of school, OT @ work, taking the "Little Miss" (she's 16 now) out 'driving', etc).


Reply
Posts: 393
Topic starter
(@soakes94)
Honorable Member
Joined: 18 years ago

Im using the Lynx USB dongle and it was connected to some ren48LSD's. I can always just make some of the circuit boards from here, its just I have some PIC16F688 lying around and I already know how to build the required circuit to run one. I really just want to be able to put a PIC16F688 inside each of my RGB floods and then be able to control all the colours individually and have a strobe function. Just now my RGB floods all connect upto a ren48lsd and it works but its just a hassle since there is alot of cable all going to one place. It would be nicer and "cooler" if it all just daisy chained around my garden.

I feel the same about finding time todo all of this stuff, I would have started todo things around april/may time but this year has been crazy. I have been doing diffirent jobs here and there, finishing school and now I'm having to pay to keep my car on the road so I cant afford to much lighting stuff 🙁


Reply
Page 1 / 3
Share: