Yet Another Flood..
 
Notifications
Clear all

Yet Another Flood..

30 Posts
12 Users
0 Reactions
11.5 K Views
LabRat
Posts: 2981
Topic starter
(@labrat)
Famed Member
Joined: 17 years ago
dirknerkle wrote:I've done the same thing numerous times. I always print the final tracings out and then actually check for a fit with the parts. I've discovered lots of wierd things...

Unfortunately I don't think this would have helped (in this instance, as I normally do do that myself). Unless I used properly calibrated drills to make holes in the paper.. I wouldn't have noticed that the holes were too small.

I've fixed it all up.. and will try again.

(Lesson learned)

I will also look for some nice bright 5mm LEDs to make some accent (vs FLOOD) lighting. Just a disappointment as I was looking forward to putting this together tonight, and hooking it up to the REN48LSD.

On the flip side though.. dang but they looked good. 😉


Reply
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago

How about using a 1/4 or 1/2W resistor lead cutoff as an extender into the holes and then soldering the LEDs to the cutoffs. Not pretty but would save your boards and allow you to test them out...


Reply
LabRat
Posts: 2981
Topic starter
(@labrat)
Famed Member
Joined: 17 years ago

I've got enough Blue LED's left over from the LedTricks, so that I can populate a board to test.


Reply
LabRat
Posts: 2981
Topic starter
(@labrat)
Famed Member
Joined: 17 years ago

Pictures of the board... (the word "FLOOD" (which should appear to the right of the LabRat logo) got dropped from the Silkscreen somehow)

With a MightyMini for size comparison. I intend to use it inside a porta-flood enclosure so I have more room to play with.

Optional use with 5mm LED (standing tall)

Optional use with 5mm LED (legs bent to new angles)


Reply
Posts: 2541
(@lightup)
Famed Member
Joined: 17 years ago

Hi, LabRat

Where do you, if I may ask, get your boards done? MPC in Nepean?
What is the individual LED current spec for your floods?

I had thought of making some floods in the future and like the RGB types.
Presently I'm building (slow process) my MDF CNC router - hope to make some pcbs some day.


Reply
LabRat
Posts: 2981
Topic starter
(@labrat)
Famed Member
Joined: 17 years ago

Are you another local?

I've been using SeeedStudio for my boards. If you can keep the size down, their prices are amazing. I spent a few hours last night re-working the PIX-C (or is it PIK-C.. I can never remember), in order send those off as well.

Learning to "wait patiently" for mail from HK (Hong Kong) is a necessary evil, but the end result sure feels good. I'm etching less, and waiting more. 🙂

Consider updating your profile so we know your general whereabouts. If close enough I'd love to see more of your CNC router.

LightUp wrote:Hi, LabRat

Where do you, if I may ask, get your boards done? MPC in Nepean?
What is the individual LED current spec for your floods?

I had thought of making some floods in the future and like the RGB types.
Presently I'm building (slow process) my MDF CNC router - hope to make some pcbs some day.


Reply
Posts: 2541
(@lightup)
Famed Member
Joined: 17 years ago

Almost local.
I used to live in the Borden Farm area and moved south to Morrisburg a few years ago, after I retired from Nav Canada (yeh, retired lab rat from Hunt Club....).

I started a DMX design last year when I came across the "595" ic. Plan to build a dimmable 32 channels per unit to drive individual lights, rather than a 120VAC string. I bought enough parts to make 32 units (i.e. 1024 lights - but that project is on hold due to my CNC itch.... I had also started a handwired RPM USB-DMX dongle (prior to the current group buy) and used a Hammond aluminum case bought at Active on Merivale Rd. About 3/4 done - also on hold. They feel more like winter work.....:)


Reply
LabRat
Posts: 2981
Topic starter
(@labrat)
Famed Member
Joined: 17 years ago
LightUp wrote:Almost local.
I used to live in the Borden Farm area and moved south to Morrisburg a few years ago, after I retired from Nav Canada (yeh, retired lab rat from Hunt Club....).

I started a DMX design last year when I came across the "595" ic. Plan to build a dimmable 32 channels per unit to drive individual lights, rather than a 120VAC string. I bought enough parts to make 32 units (i.e. 1024 lights - but that project is on hold due to my CNC itch.... I had also started a handwired RPM USB-DMX dongle (prior to the current group buy) and used a Hammond aluminum case bought at Active on Merivale Rd. About 3/4 done - also on hold. They feel more like winter work.....:)

I've also created a very low cost Usb2Dmx adapter (with a Vixen plugin) and can make a version 1.0 PCB available to you if you want. The entire BOM is about $25.00 (includes a case).


Reply
Posts: 2541
(@lightup)
Famed Member
Joined: 17 years ago

Thanks for the offer.
I have all the parts to build two of RPM's version using the UM245R module and the ATMEGA88 micro, but will use a 20MHZ xtal and update the firmware accordingly.

Does your version use the same parts as RPM's?

Secondly, what type of LED do you use for your flood? I'm looking for a part number to peruse the datasheet.


Reply
LabRat
Posts: 2981
Topic starter
(@labrat)
Famed Member
Joined: 17 years ago

My solution is based on a PIC (18F2455), so not compatible with the ENTEC method.

My LED's came from the group buy... can't for the life of me recall what the link is, but should be present somewhere in the "Mighty Mini LED group buy forum discussion" (or words to that effect).


Reply
Page 3 / 3
Share: