USB vs SerialPort
 
Notifications
Clear all

USB vs SerialPort

11 Posts
8 Users
0 Reactions
6,127 Views
Posts: 112
 fj
Topic starter
(@fj)
Estimable Member
Joined: 19 years ago
[#11136]

I'm not sure if this has been discussed before -searching for USB didn't show up anything, but why hasn't a controller that works off USB rather than an old DB9 COM port been considered?

Are there technical limitations? Does it make a board too expensive? Is USB not fast enough? Does Vixen need a rewrite to be able to do it?

Just wondering 🙂

thanks, fj


10 Replies
Posts: 1041
(@n1ist)
Noble Member
Joined: 19 years ago

USB only works over short distances, and most people have their controllers out in the yard while the computer stays inside. As for USB support, you can use a USB-serial adapter (often USB-RS485) or a USB-DMX dongle, depending on your controllers.

/mike


Reply
Posts: 107
(@hogfather)
Estimable Member
Joined: 17 years ago

What about wireless? That seems to be the next logical step.


Reply
Posts: 1041
(@n1ist)
Noble Member
Joined: 19 years ago

It is, and that's why Dave created the ren-w (for Renard boards) and RJ created the Lynx wireless DMX (for DMX, of course, including Lynx and Renards running DMX). Unfortunately, Tesla never got the wireless power stuff worked out, so we still have to run power cables 🙂
/mike


Reply
Posts: 1041
(@christmas-light)
Noble Member
Joined: 18 years ago

I am using this, and it is a very good 8 port serial card 😀

http://cgi.ebay.com/Smartio-MOXA-8-Port-Serial-Card-C168H-PCI-W-CABLE-/360165242101?cmd=ViewItem&pt=PCC_Drives_Storage_Internal&hash=item53db8574f5

C - L


Reply
Page 1 / 3
Share: