Quick update - - I just received the second set of proto boards today and should be getting parts (which will make up the final BOM) from Mouser on Friday so hopefully I can whip one up over the weekend. I still need to test Renard protocol (work has been a bear lately...) but it's looking good so far.
Sounds like you're having a lot of fun with this. Have you got a Mouser BOM that can be shared? That way if any of us are placing a Mouser order soon, we could pickup the parts in advance of getting some of these boards. 🙂
LabRat wrote:Sounds like you're having a lot of fun with this. Have you got a Mouser BOM that can be shared? That way if any of us are placing a Mouser order soon, we could pickup the parts in advance of getting some of these boards. 🙂
I do actually - keep in mind that I haven't used some of these particular components but most should be fine...
http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=3259d5ab65
edit - just noticed that something went up in price from when I initially created the BOM since the price went from ~$36 to ~$45!
budude wrote:I do actually - keep in mind that I haven't used some of these particular components but most should be fine...http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=3259d5ab65
edit - just noticed that something went up in price from when I initially created the BOM since the price went from ~$36 to ~$45!
If a coop would benefit everyone I could be talked into it.
Just checked Mouser for some quantity prices (Shipping is not included)
1 - $45.79
25 - $28.51
50 - $26.55
100 - $25.55
So if we could get at least 25~50 BOM's it would be a good savings. 50-100 is not much different, so would not have to be a large buy to get a good price.
tjetzer wrote:If a coop would benefit everyone I could be talked into it.
dlovely wrote:Just checked Mouser for some quantity prices (Shipping is not included)1 - $45.79
25 - $28.51
50 - $26.55
100 - $25.55So if we could get at least 25~50 BOM's it would be a good savings. 50-100 is not much different, so would not have to be a large buy to get a good price.
I just thought about this a little more. I don't have a pickit to program the pics. If I run the coop then everyone would have to program their own pics.
No pickit?! Well good time to get one. LOL. I would run it but have not been here a year yet and lack the time. I think the interest was high that someone might pick it up. I would offer to program the pics for you, but I have a remodel project going on and a wedding very shortly so I don't think I would find the time. Maybe if by late June early July no one runs it I would make the offer open to do the pics for you. 😉
tjetzer wrote:I just thought about this a little more. I don't have a pickit to program the pics. If I run the coop then everyone would have to program their own pics.
I'm definitely interested in a couple of boards. I may already have most of the components to build out at least one board.
I need something to drive my Super Strips full out, and one of these could drive 6 of my stars/snowflakes (8 spokes of strips). Don't have that many, but you never know...
well i have already said i would be in for 6-10 of these. i would just need to sell my ren24lv first. so ill keep watch.
Another update... I built up one of the new boards last night/this morning with DMX/PWM/DC code and it worked great with all 48 channels working fine. I flashed Renard/PWM/DC code and that also worked. I attached a Renard/Simple (16-channels) off the OUT and verified Renard chaining is OK.
The only things I have left to test is RS-232 (I have only tested RS-485 so far) and 12v operation. Since I don't have 12v strips, I'll verify power to the PICs is good through the regulator and that 12v is being at the RJ45 outputs.
A couple minor things about the BOM I posted earlier - it does not have an LED specified, it does not have the 2/3-pin headers and it has two versions of the DC terminal blocks. The decoupling caps are not the most perfect fit but should be fine. I'll get all that fixed soon. A quick SWAG would be about $15/board (PCB only) depending on shipping costs and quantity.
Instead of starting a separate thread I'd like to get a feel for how many boards folks are interested in and then just have a separate coop thread. Also - just for interests sake - would you half or fully populate the board (it can run with just 3 PICs or 24 channels). Anyway - please indicate the number of boards you want and half/full populated.
Brian
