Super Strip Flood C...
 
Notifications
Clear all

Super Strip Flood Controller

240 Posts
30 Users
0 Reactions
91.6 K Views
Posts: 147
(@blickensderfer)
Estimable Member
Joined: 19 years ago

Does anyone have a pic or video of the Super Strip Flood? I've looked on Kostyun's website but he doesn't have a pic or video. I would like to see what it actually looks like.

Thanks,
Dan


Reply
dlovely
Posts: 3167
(@dlovely)
Famed Member
Joined: 17 years ago
blickensderfer wrote:Does anyone have a pic or video of the Super Strip Flood? I've looked on Kostyun's website but he doesn't have a pic or video. I would like to see what it actually looks like.

Thanks,
Dan

This is the video that used to be on Frank's store I think:

Also his information post on the strips:

http://doityourselfchristmas.com/forums/showpost.php?p=56225&postcount=1


Reply
budude
Posts: 10400
Topic starter
(@budude)
Illustrious Member
Joined: 18 years ago
blickensderfer wrote:Does anyone have a pic or video of the Super Strip Flood? I've looked on Kostyun's website but he doesn't have a pic or video. I would like to see what it actually looks like.

Thanks,
Dan

Here are some pics of mine. I'll have to pull one down and take some close-ups to show the LEDs and resistors a bit better. Mine do not have the White LEDs installed - but will as soon I get them from the recent coop. I encased mine in 1"x18" acrylic tubes from Tap Plastics.


Reply
Posts: 147
(@blickensderfer)
Estimable Member
Joined: 19 years ago

bubude,

A close up would be great. Too bad I missed the coop on these and the PCB's.


Reply
budude
Posts: 10400
Topic starter
(@budude)
Illustrious Member
Joined: 18 years ago

I picked up 100 MPS2222A from my surplus place and connected a couple on the protoboard layout and found they got hot pretty quickly. I measured the CE voltage at about 2v with the Ic at 360mA so it was at 720mW - - way over the 625mW package max - guess that explains the 'toastyness". I put the RadioShack 2n2222A in and CE was at about .4V. I lowered the base resistor to 470R with the MPS2222A and that got the CE back to the .4 as the 2n2222A variety. That puts it at around 150mW so it runs barely warm now. So - my silkscreens will be wrong but that's OK - at least I know I have a working solution now - boards shipped from China today - woohoo!

I asked my surplus guy about bulk discounts on 5000 of the transistors but he would only go down to 5c each - I can get them from Mouser at about 3c each so I guess it's no better - oh well... btw - I'll get those close-up pics for you tomorrow - I want to proto out a real tube anyway.


Reply
Page 7 / 48
Share: