Super Strip Flood C...
 
Notifications
Clear all

Super Strip Flood Controller

240 Posts
30 Users
0 Reactions
91.6 K Views
Posts: 6728
(@p-short)
Illustrious Member
Joined: 20 years ago
n1ist wrote:Linear regulators really aren't the way to go at that current. Just remember that at 20A (5A per regulator), the balancing resistors will dump 7.5W each, and at 5V/20A out from 12V in, the regulators need to dissipate 35W each.
/mike

I agree ... some sort of switching supply would work out a lot better.


Reply
budude
Posts: 10400
Topic starter
(@budude)
Illustrious Member
Joined: 18 years ago

I sent out to get a couple boards fab'd out today so we'll see how it goes. It was tricky getting the last few traces routed out as the standard autorouter on DipTrace does not seem to use vias much.


Reply
Posts: 1372
(@fathead45)
Noble Member
Joined: 18 years ago

keep us up to date. maybe i missed it but do you have a ballpark on how much these would cost to populate??


Reply
budude
Posts: 10400
Topic starter
(@budude)
Illustrious Member
Joined: 18 years ago
fathead45 wrote:keep us up to date. maybe i missed it but do you have a ballpark on how much these would cost to populate??

Yep - see post #18 - about $36 in parts (single board purchase) and the boards will probably be around $15 or so (depends on count...) - shooting for <$50 per complete set... I should be receiving my two demo boards on 3/22 and if it looks good, I'll try and get something cooking for April... I'm still spec'ing out the transistor to use. I have a surplus store near me that has 9000+ of the 2N2222A variety so I might get some of those to test and if good, I'll make him an offer on a few thousand if I can get the price for 2-3 cents each or better.

This place has several parts we use on some of the DIY controllers like sockets (DIP 8/14 and RJ45) as well as common caps and other tidbits. I'll see if I can do some wheelin' and deelin' :p


Reply
Posts: 1372
(@fathead45)
Noble Member
Joined: 18 years ago

that is a good price point. as im running 2 ren24lv per arch so that is around 75 bucks per arch, lol. i like saving money and using 1 board instead of 2. each one of my archs are 48 ch. so this is perfect. ill sell my ren24lv when these are ready, lol. next is getting the dmx to grinch convertors and ill be all dmx this year haha.

thanks for the work, i hope all goes well


Reply
Page 6 / 48
Share: