If you are putting the led and octo in series. the 390 ohm resister may be too large depending on the supply voltage. If you need to run the numbers...
I did a custom model and told xlights it was a single color red. Here is my layout/model/settings I'm using the WS2803 chip but xlights doesn't care.
I put my line buffers within 12" from the controller. My longest distance is 125' over cat 5e without any issues.
Ok, will do. We do have Vacation Bible School in the evenings next week so it may take me an extra couple days to test everything. Dan
I just placed an order with Mouser along with a few extra parts that I was needing to order. I'll be getting them first of next week. Dan
Bill, I looked at the 220uf you listed and compared to the one from digikey. When you say larger.... physical size? because the one from mouser is...
Rob, I'm one of the list that received the 2 bad buffer boards. You can send me the replacements. I can send you a pic of the board to confirm if yo...
Dirk, I did they a few years ago with 84 candy canes each candy cane has 18 red leds. here is a write up I did back then. Dan
Paid. Thanks.
I too use those large enclosures. This is an old pic. It now has a F16 with expansion board instead of the two J1sys ECGAD8's.
I only converted mine for ease of configuring and management. I currently use 3 Ubiquiti AC Pro's in my house and garage with 3 VLans / SSID's. By a...
Here is some discussion about it. But as of now, there isn't any.
You can convert the picostation M2 over to UniFi. Here is the link to do it. I've done mine and it was an easy process.
I've soldered a lot of surface mount ICs using my hot air soldering station. Many with a lot more pins and closer together without any issues. This o...
ok cool. I'll just leave it off. Thanks everyone for the help.
