Do want.
I have changed the SR 32 Splitter to a 5cm x 5cm footprint to keep the cost of the pcb down,, files have been updated in post #40
ChiefWarrant wrote:Mac,These ( http://www.bcwsupplies.com/products/Golf-Ball-Display-Cases/Golf-Ball-Square.htm ) may work for your burst module.
- Holds a regulation sized golf ball
- Crystal clear
- 2 piece designDimensions
- Exterior 2 1/4 x 2 1/4 x 2 1/4
- Interior 2 3/16 x 2 3/16 x 2 3/16Tony
It looks like these ones will accommodate the new size of the Strobe Burst Module with a hole drilled in the top so the wire can go though and seal it with a bit of RTV silicone, Thanks Tony,
Does the simple Ren32 power the pucks, or do you need to feed them directly, or via the splitter?
CaptKirk wrote:Does the simple Ren32 power the pucks, or do you need to feed them directly, or via the splitter?
The Simple Renard powers the pucks but each RJ45 connector has 4 channels on it so I made a splitter so you can divert the 4 channels to individual cables so you can run pucks in different places,, they will also work with a Ren 64 but I would not suggest running 64 of them off a Ren 64 because each module consumes 11-13.5 ma depending on the strobe speed and you would be getting close to the max current of the LM7805 VReg on a Ren64 with all the other devices on that board..
Can the pucks be used with a DMX controller? Or is it Renard only?
Do you plan to make these available?
@ Slite,, which DMX controller are you talking about?
@ mschell ,, yes they will be made available soon, looking at cost per module with enclosure now.
The DC48 from AudioVisualDevices for instance
To summarise, the DC48 is a DMX input controller with 48 DC channels. Some specs:
Dual DC input (12V - 36V) (large screw terminals)
2x 20A mini blade fuses (20A overall max per 24 channels)
48 DC outputs (2A max per channel)
Output terminals arranged as V+, Ch, Ch, Ch (suits RGB)
True isolated DMX input (2x RJ45 sockets for looping)
Hi Mac,
Please excuse another "New-Bie" trying to get the strobe module control straight in my head 🙁 ?? When programming in Vixen, etc, does each channel just gate the appropriate strobe module on - ie. decide at programming time how long the strobe sequence will run, and leave the module to "do it's thing", for as long as it is told to be on. Or ?? do you program a random series of "ON / OFF" blocks for the intended length of the strobes ? I suspect from the circuit that the former is the intended path, but would value confirmation 🙂
This circuit has been whirling around in my head for some time, and has come to a head recently as I have just located at a $2.00 store here a LED head band light assembly complete with 9 Hi Bright white LED's in it. Each individual LED has reflectors incorporated, all this for $2.00, it is reasonably watertight, and has a battery-box attached that could easliy house the electronics!! It certainly gives me food for thought!! 🙂
Cheers, and thanks for any comments 🙂
Terry
