Matt_Edwards wrote:rather a broad question.
I have used:
OurPCB.com
PCBcart.com
Futurlec.com.au's PCB Service
www.xjypcb.comPricing is very heavily dependant on size, quantity and to a lesser extent the technology.
the last controller I did was 55mx20m and came in at about US$0.6 each delivered.
I trust that was mm... not m .. or you got one HECK of a bargain!! 😉
mm it is.
Best price wise has been www.xjypcb.com
But I have used PCBCart the most as they make it real simple to reorder design on-line and their price is usually not far of the mark.
Partly depends on board size.
For example, I've kind of held off on doing the board order for my I2C project because the only vendor that has decent per-board pricing for tiny boards like that (read: free depanelization and sane depanelization policies) has a rather wacky order process that involves faxing things back and forth - I don't have a fax machine!
If you're looking for small quantities of moderate sized boards AND you are producing an "open source" design, seeed studio has a decent PCB production service.
Matt_Edwards wrote:mm it is.Best price wise has been www.xjypcb.com
I've been to their site but I can never find anything out about pricing, how to order, etc. Is there some hidden button/hot section of their site that you have to hit to see anything other than generic pictures of some of their product?
For years, I used ExpressPCB, but got frustrated with the additional cost for Gerbers, lack of DRC in their software, and the difficulty of placing traces on the inner planes. Lately, I have been using GoldPhoenix ($99 for 155 square inches, delivered). I have used SparkFun's BatchPCB service for small prototypes, but they get expensive quickly ($2.50 per square inch + $10 per order + shipping).
I just placed an order with PCBGeek ($89 for 200 sq inches delivered) for my soldering kit coop over on DLA; we will see how they work out.
These are all for double sided, green mask, white silkscreen on one side. I have also used Gold Phoenix for some 4 and 6 layer and thin (0.24" thick) boards too, with good luck.
/mike
