Random Firing Board...
 
Notifications
Clear all

Random Firing Boards

17 Posts
8 Users
0 Reactions
7,580 Views
Posts: 86
Topic starter
(@afroopuff)
Estimable Member
Joined: 17 years ago
[#10788]

I am looking to make a very simple PCB that would just set off randomly. It would be to control single LED's placed throughout a room to make it look like flashing stars in the sky. (Similar to strobes on a C-9 string)

The goal though, is to not have to plug into the computer, but instead to have the board completely self-contained and either run off of an outlet plug or battery.

Problem is, I don't know the first thing about how:)

Any guidance/suggestions would be greatly appreciated.

Thanks
Mike


16 Replies
Posts: 2168
(@djulien)
Noble Member
Joined: 19 years ago

Are you wanting to design the PCB as a learning exercise, or make use of something that already exists?

How many "stars" do you need to control, and are they one color or multi-colored?

don


Reply
Posts: 86
Topic starter
(@afroopuff)
Estimable Member
Joined: 17 years ago

One color, just a simple clear LED

And I want to do it for the experience. Not sure if there is such a product...

Thanks!

Edit:* probably somewhere between 6-12 stars


Reply
IdunBenhad
Posts: 1603
(@idunbenhad)
Noble Member
Joined: 18 years ago

Hi:
The design for what you want to do should be relatively simple.

Use a 555 timer, maybe the CMOS variety. It should be able to handle the current of an LED and the timing could be adjustable using very few components. The PCB would be small. Maybe you could fit it into a small pill bottle or plastic box.

There are lots of 555 timer projects already in existence, so it should be very easy.

Have fun.

Just did a search for DIY 555 TIMER PROJECTS. Here is one that is close to what you want. There are many, many others.

http://www.doctronics.co.uk/555.htm


Reply
Posts: 6728
(@p-short)
Illustrious Member
Joined: 20 years ago
IdunBenhad wrote:Hi:
The design for what you want to do should be relatively simple.

Use a 555 timer, maybe the CMOS variety. It should be able to handle the current of an LED and the timing could be adjustable using very few components. The PCB would be small. Maybe you could fit it into a small pill bottle or plastic box.

There are lots of 555 timer projects already in existence, so it should be very easy.

Have fun.

Just did a search for DIY 555 TIMER PROJECTS. Here is one that is close to what you want. There are many, many others.

http://www.doctronics.co.uk/555.htm

I'm still not sure what he is looking for. This might work if he wants to have one board (with one 555 chip) for each light, but I think this would turn out to be a lot less random than he would want.


Reply
Page 1 / 4
Share: