I know I remember seeing it on here within the last couple of weeks. Sorry if it is a repeat.
Looking for a DMX based 4 channel controller to control RGBW spots. Like to build MR16 sized spots with a DMX control PCB built in. I have a design in my head to put a SSR with in a light. Trying to figure out if it is cheaper to build a 4-channel DMX control in lights, or run a control wire (cat5) back to a SSR based board. Power for light will come from an external source that is jumped from light to light.
Thanks for any info.
You may be remembering bududes' Super Strip Flood Controller which runs on DMX and controls LED Super Strips (Some of Franks' boards I think) which are RGB+W Flood lights.
That's probably it because I don't see another new design around here.
You might be thinking of RPM's stuff - he has a 4-channel DMX/ACSSR as well as a 8/16-channel DMX/DCSSR (don't think he had a 4-channel DC version but could be wrong).
There is a number of 4ch DC Controllers in the pipeline, however I don't think any have been published yet. you may need to way off a bit and see or go the DC SSR route.
