Random Firing Board...
 
Notifications
Clear all

Random Firing Boards

17 Posts
8 Users
0 Reactions
7,581 Views
Posts: 136
(@j1sys)
Estimable Member
Joined: 17 years ago

another idea is to learn pic programming and use a small pic (10f200?) to use a psuedo random delay. of course psuedo random would actually create a pattern but with each board using a different seed the permutations might look very random.

-ed


Reply
Posts: 789
(@chilloutdocdoc)
Prominent Member
Joined: 18 years ago

One thing i've noticed with close observation, is most attempts at a "random" pattern, are infact mixes of sequential lights.... Ex 5, 4, 6, 3, 7, 2, 8, 1, 9 10, repeat -> 5, 4, 6, 3, 7, 2, 8, 1, 9, 10. Depending on the number of stars you were looking for this might just work.

A few 4017 decade timers would do the trick. You could make a few with different clock rates. You could google up some circuits for them, and they'd just flash one after the other, but maybe mixing them, and having different speeds, you could get what you wanted. I'm not sure, but you might even be able to leave some "blank" pins, and then mix your timing up even more.

Josh
Chilloutdocdoc


Reply
Posts: 86
Topic starter
(@afroopuff)
Estimable Member
Joined: 17 years ago

Sorry I have been absent, I didn't realize the post was still active.

I was originally looking for 1 single board to control all of the LEDs, and think that would be the most efficient.
Like many have suggested, it doesn't actually have to be completely random. I just thought that might be easier that way. I am looking for it to run itself (no computer plug in.)

Does that work along with a small PIC or the decade timer?

Thanks everyone!


Reply
Posts: 789
(@chilloutdocdoc)
Prominent Member
Joined: 18 years ago

<--- Simple demonstration of what a small PIC could do. Lot of variables to still play with. Only reason you see it hooked up to the computer is because it's getting the 5V from it, it could and would be either battery powered or powered by some other means. Details to come soon


Reply
Posts: 6728
(@p-short)
Illustrious Member
Joined: 20 years ago

This all depends on what you want the display to look like. Do you want something like that video which chilldocdoc linked to, in which one or more LEDs are on almost all the time, the duty cycle of each LED is 50%, and the on/off are synchronized? Or do you want something where the LEDs are off most of the time, occasionally flickering on (or the other way around, mostly on with occasionally flickering off)? Do you want each LED to always come on at the same intensity, or do you want the intensity of a given LED to be different each time that it is on?

It's easy to obtain the effect in the video using either a 4017 or a PIC, but you can get a much wider variety of effects with a PIC (or more than one PIC).


Reply
Page 2 / 4
Share: