I thought I had the DMX working on the v1 PCB's I have. I did switch port 1 and 2 at some point, but I looked at the schematic and it looks correct. I will try to investigate it more.
ukdel wrote:update ... Well i tested the decoder with a USB/DMX dongle and was able to eliminate that from being the problem. SO this points back to the output from the BBB16 board. It is probably a simple config issue but like I said I have tried most things. If anyone has this board and got the DMX working would appreciate any tips. Regards
So, the buttons are supported now in the firmware? Also, any progress on the smart receivers?
Glycerine wrote:So, the buttons are supported now in the firmware? Also, any progress on the smart receivers?
The latest EEPROM bin file has button support. It requires FPP 4.0 or newer. The latest Smart Receivers Prototypes have been stuck on a boat somewhere in the ocean for over a month. I have been working on a breakout for a Beaglebone to use it with the HolidayCoro Flex system.
https://github.com/computergeek1507/PB_16/blob/master/PB16-eeprom.bin
Yep. I hear the slow boat story a lot lately.
I'm only opting for FedEX or DHL air freight for my boards. Last slow boat order I did took two months !
scooter_seh wrote:The latest EEPROM bin file has button support. It requires FPP 4.0 or newer. The latest Smart Receivers Prototypes have been stuck on a boat somewhere in the ocean for over a month. I have been working on a breakout for a Beaglebone to use it with the HolidayCoro Flex system.https://github.com/computergeek1507/PB_16/blob/master/PB16-eeprom.bin
My last order of K16's were shipped to me via FedEx and were stuck in FedEx customs hell for 4 weeks. Called FedEx almost every other day to try and get it resolved. Even the "fast" methods have issues. 🙁

