When you get to the shipping part of checkout, they have a few options. There are a couple of "DDP" options (Delivery Duty Paid) where they calculat...
Have you fund a good alternative yet? One with an extensive and searchable parts library like jlcpcb?
FPP based so can talk e1.31 or ArtNet.
It doesn't matter what protocol the Renard board is flashed with (Renard or DMX). The RJ45 port on the Renard board uses pins 5/4 (+/-) and that's wh...
One thing I should mention: the TTY's from FPP can run DMX or Renard. Thus, if you had the Renard firmware on the controllers, you SHOULD be all set...
The information you need is half way down:
Go to system settings, Privacy & Security, Local Network, and make sure xLights has it turned on. Newer Mac's have very fine grained security and it...
The PB2 is a completely different beast from the original PB or any of the current BeagleBone devices. It's based on an AM62x chip which is a modern...
The main reason originally was due to DMX and PixelNet. A full universe of 512 channels takes about 21ms to output over a normal DMX 250 kbps connec...
Ancient version of xLights. You need to get up to xLights 2024.15 or so to support FPP8. The Mac needs to be running macOS 11 or newer.
At this point, the best option is likely . It's not browser based as they would need to install an app, but it works really well and works perfectly...
All three of those should be under a single "Control Channel" entry. Delete lines 10 and 11 and then hit the "Add" button twice to give two lines fo...
MartinMueller2003 wrote: Or do you have non linux code running on the falcon controllers? FSEQ files are starting to get seriously large. For the ES...
MartinMueller2003 wrote: Thanks. I will look into "patch". Do you have a pointer to the spec? It's not so much a spec.... We moved to using FilePo...
