FPP PB16 Pixel Cont...
 
Notifications
Clear all

FPP PB16 Pixel Controller

630 Posts
62 Users
6 Reactions
389.5 K Views
rayhjr
Posts: 972
(@rayhjr)
Noble Member
Joined: 12 years ago

I have made a mistake when I ordered more boards about a month ago. I went to Github and made sure I had the latest updated Gerbers before I ordered but apparently I misplaced the newest file on the pb16 Expansion, The one with only a PB and 2 Expansion headers. So instead of version 3, I ordered v 1. My second problem is I have assembled one and the LM7805 is heating up fast and the pb is losing power. Should that be a DC to DC converter instead? The silkscreen and the BOM has 7805 but the Digi-key part is the converter. I'm ok with the v1 board if it's usable, I'll be missing some things that the v3 has but oh well.
Man talking about making a mess of things but Yeah. Good grief!


Reply
Posts: 447
(@glycerine)
Honorable Member
Joined: 7 years ago
rayhjr wrote:I have made a mistake when I ordered more boards about a month ago. I went to Github and made sure I had the latest updated Gerbers before I ordered but apparently I misplaced the newest file on the pb16 Expansion, The one with only a PB and 2 Expansion headers. So instead of version 3, I ordered v 1. My second problem is I have assembled one and the LM7805 is heating up fast and the pb is losing power. Should that be a DC to DC converter instead? The silkscreen and the BOM has 7805 but the Digi-key part is the converter. I'm ok with the v1 board if it's usable, I'll be missing some things that the v3 has but oh well.
Man talking about making a mess of things but Yeah. Good grief!

Do you have a converter that you could swap out and use? The new BOM does call for the converter, but I can't say for sure if that's what's causing your problem, although it does sound like it. Do you have a fan that you can blow across it and see if you can tell a difference with active cooling? I think the only place I used actual 7805 vregs was on the differential receivers, by the way.


Reply
rayhjr
Posts: 972
(@rayhjr)
Noble Member
Joined: 12 years ago
Glycerine wrote:Do you have a converter that you could swap out and use? The new BOM does call for the converter, but I can't say for sure if that's what's causing your problem, although it does sound like it. Do you have a fan that you can blow across it and see if you can tell a difference with active cooling? I think the only place I used actual 7805 vregs was on the differential receivers, by the way.

I have moved on for now. The only one I have is on a pb16 board and don't want to remove it just to see. I have some on a "slow boat from China order" but they maybe a while getting here. I'm sure that's my problem. If I had been paying closer attention I would have known better. I'll post when I get parts in and get it working. Thanks


Reply
Posts: 87
Topic starter
(@scooter-seh)
Trusted Member
Joined: 12 years ago

The BOM has always had a Murata OKI-78SR-5 voltage regulator not the 7805. It was my intent to use it from the start. The Pocketbeagle requires around 1 amp at 5v and a 7805 would have overheated if I used it (like you are seeing). The reason the silkscreen says "7805", is Kicad(the PCB software I use) doesn't have a symbol for the Murata part in its default library. I just used the 7805 symbol because the Murata OKI-78SR-5 voltage regulator is a high power switcher replacement for the 7805 liner regulator and uses about the same PCB footprint. I was too lazy to get the correct symbol library from digikeys website and just used the 7805 in Kicad. For the PB16 Expansion v1 vs v3 discussion, the new features on the v2/v3 are, I increased the the mounting hole size from 3mm to 4mm and I added a breakout header for the two Serial Outputs. Besides that there are no other differences.

Thanks,
Scott

rayhjr wrote:I have moved on for now. The only one I have is on a pb16 board and don't want to remove it just to see. I have some on a "slow boat from China order" but they maybe a while getting here. I'm sure that's my problem. If I had been paying closer attention I would have known better. I'll post when I get parts in and get it working. Thanks

Reply
rayhjr
Posts: 972
(@rayhjr)
Noble Member
Joined: 12 years ago

I received the converters and installed one on the board and all is well.

Getting ready to solder the board I got all the components together looking at BOM and comparing it to board.
This is what I saw, LM7805 across from U1

pb16 expansion pic1

If I had opened it all the way up I would have saw this

pb16 Expansion pic 2

Looking all the way across I would have seen the OKI-78SR-5/1.5-W36-C and I would have known what to use.
Not really thinking about what the board needed and just going by a list I goofed. All is well.

I am Really Grateful that you shared this project with us in the community. I have had a blast putting them together
and figuring out how I want to use them and or what to use. Learning the hole Master - Remote Thing also.
For this year I have settled on using the pb16 expansion out to a Diff. Expansion then out to 3 Receiver boards,
or at least I Think, lol. I hope to have this configuration set up and testing in a week or so. I will be doing data
and ground only from board and power from distribution boards or fuse blocks. Thanks again!


Reply
Page 47 / 126
Share: