FPP PB16 Pixel Cont...
 
Notifications
Clear all

FPP PB16 Pixel Controller

630 Posts
62 Users
6 Reactions
389.5 K Views
Posts: 57
(@aclarksr)
Trusted Member
Joined: 13 years ago

So I finished my first PB16 which all the pixel ports appear to work fine. I am having a problem with the eprom.bin file. I downloaded from Github then used FPP to upload to the uploads folder. The progress bar races across the screen and the abort button changes to close but no file appears in the window above and I cannot find it following Scott’s instructions using PuTTY. Anyone have an idea of what I may be doing wrong? Not sure that I even need the .bin file as everything appears to be working fine so far. I am running FPP 3.6.2. P.S. was there a change that prevents accessing the PocketBeagle using a USB cable and IP 192.168.7.2? I had to use a USB network adapter to connect.

Sent from my iPad using Tapatalk


Reply
Posts: 87
Topic starter
(@scooter-seh)
Trusted Member
Joined: 12 years ago

I just tried it too and it doesn't seem to work. If you upgrade to the FPP 4.0 beta, Dan added support for flashing the EEPROM bin through the web GUI. If not, you can copy the bin file to the pocketbeagle using windows explorer by going to "\\IP_ADDRESS\fpp" and dragging the file to that folder. Then it should appear in the media directory when running the "ls" command in putty. If you need additional help I can jump into zoom and help run the commands.

Thanks,
Scott

aclarksr wrote:So I finished my first PB16 which all the pixel ports appear to work fine. I am having a problem with the eprom.bin file. I downloaded from Github then used FPP to upload to the uploads folder. The progress bar races across the screen and the abort button changes to close but no file appears in the window above and I cannot find it following Scott’s instructions using PuTTY. Anyone have an idea of what I may be doing wrong? Not sure that I even need the .bin file as everything appears to be working fine so far. I am running FPP 3.6.2. P.S. was there a change that prevents accessing the PocketBeagle using a USB cable and IP 192.168.7.2? I had to use a USB network adapter to connect.

Sent from my iPad using Tapatalk


Reply
Posts: 57
(@aclarksr)
Trusted Member
Joined: 13 years ago

Thank you for a great diy pixel controller option. The File Explorer option worked just fine uploading the .bin file. I haven’t tried the serial or expansion ports yet but have no doubt they will perform flawlessly (unless I bridged a solder joint somewhere). Next to assemble the differential expansion board and a couple receivers. Thank you

Sent from my iPad using Tapatalk


Reply
rayhjr
Posts: 972
(@rayhjr)
Noble Member
Joined: 12 years ago

I did some testing yesterday, and this evening and "They Are Alive".

PB16   Diff Expantion   Receiver out

PB16   E682


Reply
Posts: 447
(@glycerine)
Honorable Member
Joined: 7 years ago

Congrats!


Reply
Page 46 / 126
Share: