FPP PB16 Pixel Cont...
 
Notifications
Clear all

FPP PB16 Pixel Controller

630 Posts
62 Users
6 Reactions
389.7 K Views
MartinMueller2003
Posts: 7613
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

The eeprom on a PI Hat is used to validate the authenticity of the physical creation of the hat (reduce counterfeiting among other things). The FPP team has a fairly loose policy on the licenses for the PI Hats. Please talk to them to get specific information.

If you are planning to include an eeprom on your custom hat, then you will need to organise the data in a very specific structure, wire the device to specific pins, and your device must meet specified size, speed, voltage etc specifications (not just any eeprom will do).


Reply
Posts: 8
(@akhil)
Active Member
Joined: 3 years ago
MartinMueller2003 wrote:
The eeprom on a PI Hat is used to validate the authenticity of the physical creation of the hat (reduce counterfeiting among other things). The FPP team has a fairly loose policy on the licenses for the PI Hats. Please talk to them to get specific information.

If you are planning to include an eeprom on your custom hat, then you will need to organise the data in a very specific structure, wire the device to specific pins, and your device must meet specified size, speed, voltage etc specifications (not just any eeprom will do).

Ive read about the expansion board of pb16.There are soo much options but iam confused. Can u guide which will be perfect.my probelm is the current setup of pi zerow board has 16 outputs. I am planing to use this as my mega tree cape of 16 channel per port 100 pixels . I need an extra 50+ pixel for my tree toper star how can I add that. If I can achieve that with a differential board, do I need a seperate eeprom? Which board is suitable for this application?
Thanks in advance


Reply
MartinMueller2003
Posts: 7613
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

16 port with 100 pixels per port is pretty good. How many pixels in the topper? if less than 500, then you can add it to the end of one of your existing strings.


Reply
Posts: 8
(@akhil)
Active Member
Joined: 3 years ago
MartinMueller2003 wrote:
16 port with 100 pixels per port is pretty good. How many pixels in the topper? if less than 500, then you can add it to the end of one of your existing strings.

May be 50 to 100 for the tree toper.


Reply
Posts: 8
(@akhil)
Active Member
Joined: 3 years ago

I have some doubts related to show networking. As far as I know we can't daisy chain the controllers right? So which will be the best practice to achieve a good show networking. In my setup I am using raspberry pi zerow which is unfortunately don't have an Ethernet port. Ive read that we can't play 40fps sequences through wirelessly. I hope there might have some solution.


Reply
Page 123 / 126
Share: