FPP PB16 Pixel Cont...
 
Notifications
Clear all

FPP PB16 Pixel Controller

630 Posts
62 Users
6 Reactions
389.7 K Views
joeytx
Posts: 249
(@joeytx)
Reputable Member
Joined: 19 years ago

I couldn't get any outputs to work on the Pi Zero until I upgraded to 7.5. That was the only version I had an issue with. The rest I could use unsigned and at version 5.5. Once I upgraded the ports were limited to 50 pixels per port but with the license I tested to 400 per port (50% brightness) with no issues.
Like I said I could have requested a voucher for a license, since I made the cape myself, but I like to support the community.


Reply
Posts: 544
(@jllracer55)
Honorable Member
Joined: 13 years ago

Anyone know if anyone has come out with an adapter for these PB16 boards? That allows you to either use a BBB or possibly even a Pi as the processor ? Seems Pocket Beagles are harder to come by and I think mine is hosed..


Reply
Posts: 128
(@sctwohig)
Estimable Member
Joined: 10 years ago
jllracer55 wrote:
Anyone know if anyone has come out with an adapter for these PB16 boards? That allows you to either use a BBB or possibly even a Pi as the processor ? Seems Pocket Beagles are harder to come by and I think mine is hosed..

I don't know about an adapter, for the be pb16 itself to a beaglebone or pi, and I don't know what expansion boards you have. However he has designed a number of boards available that connect to his expansion boards. These boards have no ports, just the plug(s) for expansion boards. We I got these boards I wasnt sure what size controllers I wanted but knew I would constantly be expanding, and These are about the only ones I use including the pb16_expansion, bbb16_expansion, pb_16_mini, and am currently using 2 of the Pi Adapter ones on this years halloween show. I have a number of his expansion boards so I am able to throw together anything from 4 ports to 48 ports. The pi Adaptors are limited to connecting to 1 expansion board, but the bbb16 can connect up to 3 expansion boards. For example, I have my pi adaptors I have connected to his multi_expansion board, so these make them 16 port controllers, with 8 local ports, and 2 differentail ports, and they have been working great.


Reply
Posts: 544
(@jllracer55)
Honorable Member
Joined: 13 years ago
sctwohig wrote:
I don't know about an adapter, for the be pb16 itself to a beaglebone or pi, and I don't know what expansion boards you have. However he has designed a number of boards available that connect to his expansion boards. These boards have no ports, just the plug(s) for expansion boards. We I got these boards I wasnt sure what size controllers I wanted but knew I would constantly be expanding, and These are about the only ones I use including the pb16_expansion, bbb16_expansion, pb_16_mini, and am currently using 2 of the Pi Adapter ones on this years halloween show. I have a number of his expansion boards so I am able to throw together anything from 4 ports to 48 ports. The pi Adaptors are limited to connecting to 1 expansion board, but the bbb16 can connect up to 3 expansion boards. For example, I have my pi adaptors I have connected to his multi_expansion board, so these make them 16 port controllers, with 8 local ports, and 2 differentail ports, and they have been working great.

Thanks shawn, guide a fooled individual then please.. I finally got this stupid pocketbeagle to boot up, load FPP but I can't get testing to work.. were you successful with having testing from FPP work? Im currently using version 7.5, with 50 pixels on an output.


Reply
Posts: 544
(@jllracer55)
Honorable Member
Joined: 13 years ago

Here is how the testing page loaded for me tonight..

Screenshot 2024 10 22 224611

Reply
Page 119 / 126
Share: