Very much interested in the E682 upgrade board because I have 3 of them and would take 3 pcbs either through you or however. Thanks.
Sent from my SM-A505U using Tapatalk
Thanks for the update Scott. I've placed orders for a batch of the Multi Expansion and Four out boards.
Have you given any thought to designing either a 16 out expansion with just 16 local outputs or a PB32 board with 32 local and two serial? I could use both of these. I realize there are similar products available elsewhere, but the Open Hardware / DIY aspect is way more satisfying.
Don
Here is a completely untested 16 Port expansion board, I designed tonight. I want to make a 32 output version, I just don't know how costly it would be. The required size of the PCB may make the price pretty high. JLC PCB 's are pretty cheap if the design is below 100x100mm. I have thought about making a version without the pixel power fuses. Just have the data output signals on a large screw terminals with GND.
Thanks,
Wow, ask and ye shall receive. Thanks Scott!
5 boards on order.... guess I'll be the QA on this one?
Can I ask you to update the silk screen layer to include port numbers similar to the Multi Expansion board? J1=17, J2=18...
Re: PB32, exactly how steep is the price increase over 100 sq cm?
Added.
Supergumby wrote:
Can I ask you to update the silk screen layer to include port numbers similar to the Multi Expansion board? J1=17, J2=18...

