FPP PB16 Pixel Cont...
 
Notifications
Clear all

FPP PB16 Pixel Controller

630 Posts
62 Users
6 Reactions
389.5 K Views
Posts: 16
(@curtisfeatures)
Active Member
Joined: 7 years ago

I’m sure I will be able to figure it out 🙂 let me know if you want me to send some high res pics over. That’s no problem at all. Everything is here now apart from the 3 pin connectors which I got from China in bulk to save some big money!

Sent from my iPhone using Tapatalk


Reply
Posts: 36
(@supergumby)
Eminent Member
Joined: 17 years ago
Curtisfeatures wrote:... In blue too 🙂

Too Funny :biggrin2:

I've got my three assembled with power supplies into battery boxes, ready to put out in the yard. Time to get busy.

Don


Reply
Posts: 3
 oddi
(@oddi)
New Member
Joined: 9 years ago

Received my boards today time to get busy with soldering

IMG 20191122 1408441 50

Reply
Posts: 36
(@supergumby)
Eminent Member
Joined: 17 years ago
oddi wrote:Received my boards today time to get busy with soldering

Whoa, in black too - this is really starting to get out of hand :w00t:


Reply
Posts: 87
Topic starter
(@scooter-seh)
Trusted Member
Joined: 12 years ago

Some people have noticed activity around the PB16 github and I want to go over some of the things I have been working on. There is one issue I feel obligated to share about the rev F PCB's that I have discovered. Early versions of the rev F gerber files had incorrect sized through holes for the Aux Header(J28). The two people who posted pictures of the rev F PCB's have boards with this issue. The included header in the BOM will not fit in the holes on these PCB's. I updated the gerbers on Nov 8th to fix this issue. If you don't plan on using the AUX header, I would just not populate it. If you need the AUX header I have been just soldering 20ga wire to the pads instead.

The primary reason I started playing with the Pocketbeagle was to build a "upgrade" adapter for my Sandevices E682 controllers. I never really intended to make a full blown controller. To fulfilled this original goal, I created the PB 16 E682 adapter PCB. This board replaces the Parallax propeller MCU with a Pocketbeagle. It also has headers for an serial output board, OLED, and RTC. In an attempt to make the simplest controller breakout for the PB, I created the PB16 Mini. It only has an expansion header and two serial output parts. The intent the Mini is to pair it with one my expansion boards or a Falcon expansion board. I also created a three expansion PCB's to expand the PB16's. First, is the "Quad Diff Out" board which adds a single differential port for 4 remote outputs. The "Multi Expansion" PCB adds 8 local outputs and two differential ports for 8 remote outputs. Lastly I created the "Four Out" PCB to to add 4 addition outputs. All the designs are in the PB16 github if interested. I have built and tested all the designs except the "Four Out" (Not here yet). I have some spare unpopulated PCB's if anyone wants one. If you have any additional design idea or issues please let me know.

Thanks,

IMG 20190930 213630

IMG 20191203 202850

IMG 20191203 205121

IMG 20191203 202821

Four Out

Reply
Page 10 / 126
Share: